Description
The versatile PA-312 mono amplifier by Monacor is suitable for use in any public area. It has connections for 4 to 16-ohm speakers and is suitable for 70 or 100-volt systems as well. This enables you to use all three outputs; for example, in small spaces or when you need to bridge greater distances. You can connect three microphones in total, and the one on the front overrides the others. If your mic requires phantom power, connect it to input 2, which is equipped with +48 volts. The PA-312 comes with rack ears so you can easily mount it in a 19-inch rack.
1 x 120 W
Silent operation due to fanless cooling concept
3 microphone inputs, one of which is a balanced input
Mic 1/line 1 with input sensitivity, priority circuit and adjustable automatic talk-over
2 stereo line inputs
1 telephone input for telephone systems with audio output
Speaker outputs via screw terminals
1 line output
Input and output level controls
2-way tone control for the output
48 V phantom power for channel 1, can be activated as required
482 mm (19") rack installation with supplied mounting brackets
Specifications
Output power 120 WRMS, 160 WMAX
Mic input 5 mV/600 Ω
Line input -
Aux input 350 mV/10 kΩ
Telephone input 1 V/10 kΩ
Speaker output 4-16 Ω, 70/100 V
Frequency range 50-16,000 Hz
Equalizer bass ±10 dB/100 Hz
Equalizer, treble ±10 dB/10 kHz
S/N ratio 66 dB (mic)
80 dB (aux)
THD < 0.5 %
Power supply 230 V/50 Hz/450 VA
Inputs 1 x 6.3 mm/XLR (combo)
1 x 6.3 mm jack (mic 1)
2 x 6.3 mm jack (mic 2-3)
2 x RCA L/R (aux 1-2)
screw terminals (telephone)
Outputs 1 x RCA L/R (line out)