Description
MAX2870 Signal Generator Module 6GHz RF Signal Source Phase-Locked Loop Module High Flatness Power
Attention:
- Certain circuit knowledge is highly recommended.
- Only a PDF schematic diagram is provided. Schematic diagrams and PCB engineering documents are not provided.
- Please read the information of this module before using, understand the power supply and basic functions, and avoid damage to the module due to improper use.
- All modules in our shop guarantee the authenticity of parameters and functions.
Module Parameters:
- Module: MAX2870
- Module type: broadband phase-locked loop frequency source
- Module power supply: +5V (TYP)
- Module current: about 220mA
- Frequency output adjustment method: CNC (SPI protocol)
- The module provides a routine platform: STM32F10X-M3 (with our STM32F10X simple verification development board, you can easily verify the module frequency output and other power)
- Module reference frequency: 100MHz (Users can design according to their own, change the crystal oscillator or external input reference)
- Module output frequency: 23.5MHz-6000MHz
- Module output interface: SMA (anti-oxidation nickel-plated type)
- Module output signal: RF signal
- Module output signal channel: dual differential channel
- Module output impedance: 50 ohm matching
- Module output signal mode: RF coupling (can be directly connected to RF equipment)
- Module features: Low phase noise, broadband RF phase-locked loop signal generator
- Module application: RF signal frequency waveform generation, sensor excitation source line loss attenuation detection, scanning clock generator, testing and medical equipment
- PCB size: 50 x 50 x 7.7mm/2 x 2 x 0.3"
- Module weight: 19.01g/0.04LB
Module Power:
* For reference only, not as a standard, there are differences between modules, subject to actual testing (Good in-band power flatness)
* 24MHz, -2.7dBm
* 100MHz, -1.2dBm
* 500MHz, -1.2dBm
* 1GHz, -1.6dBm
* 1.5GHz, +0.1dBm
* 2GHz, +1.0dBm
* 2.5GHz, +0.6dBm
* 3GHz, +0.75dBm
* 3.5GHz, +1.4dBm
* 4.0GHz, 0dBm
* 5.0GHz, -2.1dBm
* 5.8GHz, -3.5dBm
* 6.0GHz, -3.7dBm
Package Included:
- 1 x Set of Signal Generator Module
Attention:
- Certain circuit knowledge is highly recommended.
- Only a PDF schematic diagram is provided. Schematic diagrams and PCB engineering documents are not provided.
- Please read the information of this module before using, understand the power supply and basic functions, and avoid damage to the module due to improper use.
- All modules in our shop guarantee the authenticity of parameters and functions.
Module Parameters:
- Module: MAX2870
- Module type: broadband phase-locked loop frequency source
- Module power supply: +5V (TYP)
- Module current: about 220mA
- Frequency output adjustment method: CNC (SPI protocol)
- The module provides a routine platform: STM32F10X-M3 (with our STM32F10X simple verification development board, you can easily verify the module frequency output and other power)
- Module reference frequency: 100MHz (Users can design according to their own, change the crystal oscillator or external input reference)
- Module output frequency: 23.5MHz-6000MHz
- Module output interface: SMA (anti-oxidation nickel-plated type)
- Module output signal: RF signal
- Module output signal channel: dual differential channel
- Module output impedance: 50 ohm matching
- Module output signal mode: RF coupling (can be directly connected to RF equipment)
- Module features: Low phase noise, broadband RF phase-locked loop signal generator
- Module application: RF signal frequency waveform generation, sensor excitation source line loss attenuation detection, scanning clock generator, testing and medical equipment
- PCB size: 50 x 50 x 7.7mm/2 x 2 x 0.3"
- Module weight: 19.01g/0.04LB
Module Power:
* For reference only, not as a standard, there are differences between modules, subject to actual testing (Good in-band power flatness)
* 24MHz, -2.7dBm
* 100MHz, -1.2dBm
* 500MHz, -1.2dBm
* 1GHz, -1.6dBm
* 1.5GHz, +0.1dBm
* 2GHz, +1.0dBm
* 2.5GHz, +0.6dBm
* 3GHz, +0.75dBm
* 3.5GHz, +1.4dBm
* 4.0GHz, 0dBm
* 5.0GHz, -2.1dBm
* 5.8GHz, -3.5dBm
* 6.0GHz, -3.7dBm
Package Included:
- 1 x Set of Signal Generator Module
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
Am 26.09.21 hat der Verkäufer die folgenden Angaben hinzugefügt:
Am 29.11.2022 hat der Verkäufer die folgenden Angaben hinzugefügt:
Am 06.03.2024 hat der Verkäufer die folgenden Angaben hinzugefügt: