Description
JC-Q331 Audiophile Bluetooth 5.0 DAC Board Bluetooth Decoder Board Without Antenna For APTX HD/AAC
Advantages:
- Bluetooth 5.0
- Supported protocols: for APTX HD/APTX-LL/APTX/SBC/AAC
- Supported sampling rate up to 24Bit/48Khz
Description:
JC-Q331 audiophile Bluetooth audio receiving board uses QCC3031 chip for Bluetooth digital audio signal receiving, and transmits I2S digital signal to the ESS9018 chip for decoding, and the output analog audio signal is filtered and amplified by dual op amps.
The JC-Q331 module supports wireless Bluetooth reception and 1ch AUX analog audio input for switching output. The relay is used for lossless switching, which will not affect the sound quality in any way. The module defaults to AUX line mode, and the switching mode is automatic switching, with Bluetooth priority.
JC-Q331 Bluetooth 5.0 module supports for APTX-HD/APTX LL/APTX/AAC/SBC protocols, and the highest sampling rate is 24bit/48khz.
JC-Q331 is powered by DC single power supply, wide voltage range DC 5V-32V can be used. The product is designed with multi-level voltage stabilization. The Bluetooth module, DAC chip, and operational amplifier chip are all powered by independent power management chips. The operational amplifier adopts ±13V power supply.
Package Included:
- 1 x Set of DAC Module
Note:
- The length of audio cable and power cable are 200mm/7.9" long. Due to manual measurement, please allow slight error. Thank you for your understanding!
- Other items pictured are not included in the package, for demonstration purposes only. Thank you for your understanding!
Advantages:
- Bluetooth 5.0
- Supported protocols: for APTX HD/APTX-LL/APTX/SBC/AAC
- Supported sampling rate up to 24Bit/48Khz
Description:
JC-Q331 audiophile Bluetooth audio receiving board uses QCC3031 chip for Bluetooth digital audio signal receiving, and transmits I2S digital signal to the ESS9018 chip for decoding, and the output analog audio signal is filtered and amplified by dual op amps.
The JC-Q331 module supports wireless Bluetooth reception and 1ch AUX analog audio input for switching output. The relay is used for lossless switching, which will not affect the sound quality in any way. The module defaults to AUX line mode, and the switching mode is automatic switching, with Bluetooth priority.
JC-Q331 Bluetooth 5.0 module supports for APTX-HD/APTX LL/APTX/AAC/SBC protocols, and the highest sampling rate is 24bit/48khz.
JC-Q331 is powered by DC single power supply, wide voltage range DC 5V-32V can be used. The product is designed with multi-level voltage stabilization. The Bluetooth module, DAC chip, and operational amplifier chip are all powered by independent power management chips. The operational amplifier adopts ±13V power supply.
Package Included:
- 1 x Set of DAC Module
Note:
- The length of audio cable and power cable are 200mm/7.9" long. Due to manual measurement, please allow slight error. Thank you for your understanding!
- Other items pictured are not included in the package, for demonstration purposes only. Thank you for your understanding!
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
Am 03.08.21 hat der Verkäufer die folgenden Angaben hinzugefügt:
Am 29.11.2022 hat der Verkäufer die folgenden Angaben hinzugefügt:
Am 31.03.2023 hat der Verkäufer die folgenden Angaben hinzugefügt:
Am 06.03.2024 hat der Verkäufer die folgenden Angaben hinzugefügt: