If you need to return the item for some reasons, pls contact us via ebay message at the fist time, we will try our best to help you and arrange the return for you. Pls do not send back directly without permission.Thank you!!!

Launch X431 GIII X-PROG 3 Advanced Immo-bilizer & Key Progarmmer XPROG 3 Chip Reader

X-PROG 3 advanced immobilizer & key Progarmmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.

Highlights:

1. All-in-One Key Progarmmer. Integrates Multiple Function Models
2. Reads & Writes Most Engine/ Gearbox E-C-Us Without Disassembling the Shell
3. Compatible with Multiple X-431 Series Diagnostic Tablet: X-431 V, X-431 V+, X-431 PAD V, X-431 PAD VII, X431 PRO 5, X431 PROS V4.0, etc
4. Supports V-W/ AUDI MQB Platform Engine E-C-U Replacement or Cloning (Read engine E-C-U data directly from the key).
5. Works with ReProgarmming Device to Backup/ Restore Progarmming Data (For Bosch/Siemens engine E-C-U).
6. Enables Reading/ Writing EEPROM, On-Board MCU and For BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading for BMW Engine ISN Code.



Launch GIII X-Prog 3 Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/ writing EEPROM, on-board M-CU and for BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading for BMW engine ISN code.
2. Supported brands: Fit For V-.W, for AUDI, for SKODA, for SEAT, for BMW, for MERCEDES-BENZ, for TOYOTA, etc. More models continue to be updated.
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, L.-ock System, etc.
4. Compatible with: X431 V, X431 V+, X431 ProS, X431 PRO GT, X431 PRO V4.0, X431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
5. Reads & writes most Engine/ Gearbox E-C-Us without disassembling the shell



Update Note:
Launch X431 GIII X-Prog 3 latest update for RESET PROG (V10.05) Function:

1) Added E-C-U reading and writing functions for 10 models of Siemens Engine including MSD80, MSD81, MSD85, MSD87, MSV90, SIM271DE, SIM271KE, SIMOS8.4, SIMOS8.5 and SIMOS8.6;
2) Added E-C-U reading and writing functions for 5 models of Transmission including 9G_Tronic, DQ380, AL551, AL450 and 8HPXX.

Launch GIII X-Prog 3 Advantages:

1. Supports V-.W/AUDI MQB platform engine E-C-U replacement or cloning (Read engine E-C-U data directly from the key).
2. Supports V-.W/AUDI MQB platform gearbox E-C-U replacement or cloning.
3. Supports E-C.U replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the E-C-U for the fourth-generation of V-W UDS engine.
5. Supports for BMW E chassis 8HP gearbox E-C-U reProgarmming to empty.
6. Works with reProgarmming device to backup/restore Progarmming data (For Bosch/Siemens engine E-C-U).



Supported Brands

Fit For V-W, For Audi, For Skoda, For SEAT, For BMW, For Mercedes-Benz, For Toyota… (updates to be continue)

Supported Systems

Engine system, automatic transmission, instrument system, CAS, body system, l-ock system…

Compatible With 

X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII



Core Functions

1. Integrated the functions of key m-atching/ copy, anti-theft IC reading & writing, and E-C-U reading & writing, etc.
2. Supports common E-C-U/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports E-C-U replacement for all l-ost without disassembly for V-W/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports E-C-U replacement for the fourth-generation of V-W/ AUDI engine;
5. Supports E-C-U replacement for the fifth-generation of V-W/ AUDI Bosch and Siemens engines.
6. Supports the all l-ost and replacement for the fourth generation of AUDI EZS, comfortable E-C-U, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox E-C-U reProgarmming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the E-C-U cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
12. Supports V-W/ AUDI MQB platform engine E-C-U replacement or cloning (Read engine E-C-U data directly from the key).
13. Supports E-C-U replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
14. Supports reading, writing & cloning the E-C-U for the fourth-generation of V-W UDS engine.
15. Supports BMW E chassis 8HP gearbox E-C-U reProgarmming to empty.
16. Works with reProgarmming device to backup/ restore Progarmming data (For Bosch/ Siemens engine E-C-U).



Supported E-C-U MCU List: 
(Support more than 1000 models, keep updating)
 

Support EEPROM List:
support more than 1000 models, keep updating
 

How to Use X-PROG3 to Read and Write Data?

Method 1: Directly connect to OBD16 for key m-atching, data reading and writing, etc

Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer Progarmmer l-ocker and l-ock it to realize the data interaction between the IC anti-theft chip and the diagnostic host

Method 3: After removing the E-C-U from the car, connect the anti-theft E-C-U pin to the DIY slot of the immobilizer Progarmmer through the cable to realize the data interaction between the anti-theft E-C-U and the diagnostic host.



Launch X-Prog vs X-Prog 3
 

Specification:
 

Package List:

1pc x Launch X-PROG 3
1pc x Power adaptor
1pc x Main diagnostic cable
1pc x The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
1pc x BE-NCH mode cable
1pc x M-CU converter V1
1pc x M-CU converter V2
1pc x M-CU cable with multiple leads
1pc x EEPROM chip adaptor
1pc x for Benz infrared analog acquisition key
1pc x M-CU cable with multiple leads
1pc x EEPROM converter
1pc x User Manual

Launch X431 M-CU3 Adapter for X-PROG3 GIII Work on Mercedes Benz All Keys L-ost and E-CU T-CU Reading

To progarm Mercedes all keys l-ost with X431 V, X431 V+, Pro5, Pros, Pro3S, X431 PAD V, PAD VII and X-PROG3 GIII, you will need to connect the M/CU3 adapter to X-PROG3 correctly.

Adapter board code: 307140131

Note: To Use this proeuct, Customer Must have GIII

Applications and advantages of the new M/CU3 adapter:

-ADAS Advanced Driving Assist System

-For Audi VW MQB gearbox replacement

-For BMW continental msv90 engine e-cu replacement and cloning

-For Peugeot Key Progarmming

-For Mercedes Benz transmission deleted and operating instructions vgs nag2 vgs2 nag2 and vgs3 nag2

-For Mercedes Benz w164 2009 Key Progarmming

-For V-olks.wagen Audi 5th generation engine reading engine data via direct connection and online progarmming and coding

-For BMW E chassis 8hp EGS deleted

-For BMW 8hp chassis F and G delete function

-Key progarmming cas4/cas4+ all keys l-ost and adding k-eys

-Progarmming cas1 cas2 cas3 cas3+ l-ost keys and add k-ey

-CAS4 immo-bilizer module replacement

-Replacement of V-olks.wagen Audi engine and reading data med17 and edc17

-For Mercedes Benz med9.7 e-cu deleted

-For V-olks.wagen Audi Replacement 4th Generation Instrument Replacement

-Engine replacement for V-olks.wagen Audi MED17.5.22

-Progarmming of l-ost keys and adding k-ey Porsche Cayenne 2011 2017

-Cloning and virginization e39 ac delco

-Power shift cloning and virginization

-For Nissan e-cu and Tcm conversion and virgin e-cu progarmming and calibrations

-Special features in Chrysler and registration at autoauth FCA sgw

-Special features in GM and Ford 

Connection Diagram:

When is it can be used?

1. Use the BENCH mode to clone the E-CU module, when the 120 ohm resistor is connected as shown in Figure 1, or when the +12V power supply is connected to the IMMO progarmmer board; the IMMO progarmmer M/CU3 adapter board (with its own power supply) can be used, as shown in Figure2.

Figure 1:

Figuire 2:

2. With all keys l-ost for Mercedes-Benz, and the connection for key learning is shown in Figure 3 when operating on the platform.

Figuire 3:

Package Includes:

1pc x IMMO progarmmer MC/U3 adapter board kit