Description

10.1" Resistive Touch Screen Panel 1024x600 HDMI LCD Display Screen 10.1inch HDMI LCD without Shell

Features:
- 10.1" LCD display
- Resolution 1024x600
- HDMI interface for displaying
- Resistive touch control
- SPI interface for touching
- OSD Menu: Adjustable brightness and contrast ratio
- Backlight can be turned off to lower power consumption
- RoHS2.0 and CE certifications

Supported Devices & Systems:
- For Raspberry Pi 4B/ 3B+/ 3A+/ 3B/ 2B/ 1B+/ 1A+: Just plug to play.  
- For Raspberry Pi Zero WH/ Zero W/ Zero: HDMI cable is needed.
- For Raspbian/Ubuntu/Kali/Retropie: Driver is provided.
- For PC: Support connection to your computer's monitor, featuring no touching function. HDMI cable is needed.

Development Resources:
- Wiki : www.waveshare.com/wiki/10.1inch_HDMI_LCD

FAQ:
Why the LCD doesn't fit for my Raspbian?
For use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.

However, for the first testing, you may want to use our provided image directly.

Why the LCD still doesn't work with the Waveshare provided image?
Make sure the hardware connection is correct and connects fine.

Make sure the image in TF card is burnt correctly.

The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.

Which power supply should I use?
It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC's USB port might have not enough power.

For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.

For more info, please check the wiki page.

Package Included:
- 1 x 10.1inch HDMI LCD
- 1 x HDMI Connector Type A
- 1 x HDMI Connector Type B
- 1 x Resistive Touch Screen Pen
- 1 x Set of Copper Pillars
- 1 x Quick Start Guide