1970's vintage alarm mechanical table clock USSR Soviet with white dial

Made in USSR (Soviet, СССР)

It would be great find for any collector

The Raketa vintage alarm mechanical USSR table clock is a timeless piece of horological history that marries functionality with vintage charm.

Crafted with meticulous attention to detail, this table clock stands as a symbol of Soviet-era craftsmanship. Encased in a sturdy housing, often made of metal. The clock features a classic design that exudes a sense of nostalgia. Its size and weight add to its presence, making it a focal point in any room.

The clock face, adorned with Arabic numerals, hosts elegant hands that sweep smoothly, marking the passing hours and minutes. What sets this timepiece apart is its alarm function—a feature that allows for setting a specific time for the clock to ring, adding practicality to its vintage allure.

The mechanical movement within this clock reflects the precision and reliability synonymous with Raketa's watchmaking heritage. The manual winding mechanism, operated by a dedicated key or knob, powers both the timekeeping function and the alarm, engaging the user in the daily ritual of winding the clock.

This table clock isn't just a timekeeping device; it's a conversation starter and a collector's item. Its vintage aesthetic and functional alarm evoke a sense of nostalgia, appealing to those who appreciate the beauty of mechanical clocks and the heritage they represent.

The Raketa vintage alarm mechanical USSR table clock, with its blend of craftsmanship, functionality, and nostalgic appeal, stands as a testament to an era when mechanical timepieces were not just instruments but also reflections of craftsmanship and enduring design.

 

Very good condition! Please see the photos for the assessment of the clock. Runs well and keeps time accurately. Really watches look much better than in the photo


DEFECTS: small traces of use


COUNTRY OF ORIGIN: USSR

MANUFACTURER: Petrodworez Watch Factory (PChZ, Raketa, Russian: Петродворцовый часовой завод)


OVERALL CONDITION (10-point scale): 8-9


CASE

Condition (10-point scale): 8


GLASS

Material: acrylic

Condition (10-point scale): 8-9


DIAL

Condition (10-point scale): 8

Inscriptions on the dial: Raketa, made in USSR


MOVEMENT

Mechanical: hand-winding


DIMENSIONS, WEIGHT, FUNCTIONS

Height

3.74 inch (95.0 mm)

Thickness

1.22 inch (31.0 mm)

Width

2.48 inch (63.0 mm)

Weight

3.60 oz (102.0 g)

Function

Hours, minute, alarm

Country made

USSR


HISTORY

https://en.wikipedia.org/wiki/Petrodvorets_Watch_Factory

The Petrodvorets Watch Factory (Russian: Петродворцовый часовой завод) is the oldest factory in Russia. Founded by Peter the Great in 1721 as the Peterhof Lapidary Works, to make hardstone carvings, since 1945 the factury manufactures the Soviet Pobeda watches and since 1961 it has manufactured the Soviet Raketa watches. In almost 300 years of history, the factory has changed name several times. Petrodvorets is located in Saint Petersburg.

Before the Revolution

Initially, the factory produced luxury objects in semi-precious and precious stones for the palaces of the Tsars. We find these objects now in the Hermitage Museum in St. Petersburg, but also in most of the palaces of Europe, like Versailles, the Louvre or Sanssouci.

During Soviet times

In Soviet times, the plant has continued to work on precious stones. This plant has produced among others, the Mausoleum of Lenin in 1924 and the Kremlin stars in 1935.

In the prewar years, the skilled workers began manufacturing precision and measurement instruments for the Red Army and the new industry of Russian watches.

Destroyed by Nazi troops during the Siege of Leningrad, the plant was rebuilt from 1944 at the liberation of the city. In 1945 Joseph Stalin - who wanted to reduce USSR's dependence on imports from the West - gave the order to the factory to manufacture watches. The first watches were produced in the factory in 1949 under the brand Pobeda and Zvezda. In 1961, in honor of the first cosmonaut Yuri Gagarin, the factory created its new brand, Raketa, which makes its reputation throughout the world of Communist influence.

In its glory years after the war, the plant employed 8,000 people, produced 4.5 million watches per year for Soviet citizens and the needs of the Red Army. The plant is equipped with two atomic bunkers that can accommodate 8,000 people in the case of a western nuclear attack, had its own schools, university, hospital, resorts on the Black Sea, camps for Communist Youth Pioneer organization and Komsomol and its orchestras.

After 1991

Today, the plant has dramatically cut production following the troubled years of privatization and the collapse of the Soviet Union. Despite huge difficulties in adapting to the capitalist system, Raketa is one of the few (together with Vostok and Zaria) watch manufacturers, remained after the fall of USSR.

RECOMMENDATIONS

All Antique watches are mechanical. Many repairs will not be cheap, as most likely they will require replacement of non-standard parts (unlike most late model watches).

  • Antique watches should not be beaten or dropped - because repairs may be expensive.
  • Antique watches are generally NOT waterproof. This is because waterproofing was not in general production until the middle of the 20th century for most watches. Therefore you should protect your antique watch from exposure to moisture.
  • If your watch becomes wet it should be dried off quickly. Carefully open all covers and use a hair drier to blow dry the movement, dial, covers, crown. This will reduce the amount of rust.
  • If your watch becomes wet with any kind of salt water you should immediately immerse or spray your watch with fresh (no-salt) water to remove all the salt from the works before drying the watch completely. Any salt left in the watch will combine with moisture in the air to rust metal components of the movement, case etc.
  • Winding any mechanical watch tight may break the mainspring. If you can avoid it do not wind the watch hard.
  • When adjusting the hands of your watch, move them in a clockwise direction only. Counter-clockwise adjustments may damage the movement. It is desirable to adjust the hands of your watch at the same time every day. An automatic or self-winding watch should be worn for at least 8 hours a day. It is a mechanical watch in which the mainspring is wound automatically as a result of natural motion of the wearer's arm, to provide energy to run the watch, making manual winding unnecessary.
  • If you must adjust counter-clockwise make it for small adjustments only (i.e. for minutes, NOT hours).
  • Be careful and gentle when adjusting the movement speed (faster or slower). Don't make sharp movements, and don't touch other components in the movement especially the pendulum mechanism.
  • Every 2-3 years it is necessary to service and oil vintage watches. If the course of your watches is worsening and the accuracy of the reduction in the duration of the clock (autonomy) from one fully wound spring - it need a service.
  • IF the watch is dirty - allow the watch to run down, don't wind it again until you have it serviced by a qualified watch repair expert. Dust will absorb and remove important lubricants and cause the movement pieces to wear down.
  • To clean the case, dial and crystal you should use a cloth that does NOT leave fibers as these may get caught up in the movement. Check with your Watch repair expert to get an appropriate cloth.
  • Keep your antiques watch away from magnets. Strong magnetic fields may affect the accuracy of your watch since some vintage watches were made with iron based components in the movement.
  • Most Cases and Covers are fine components and will not handle abuse well. The watch should not be shaken, beaten, or stressed.
  • Antique watches generally experience an error of up to 5-7 minutes a day. Any accuracy of +- 5 minutes is very good.
  • Mechanical watch is not recommended to use for engage in extreme sports, and expose them to excessive vibration loads. Recoil force, which take on the clock, affect their reliability and precision. No matter how perfect was not anti-shock mechanism, there is always the chance of excessive load that details of the mechanism can not survive.
  • Watch with calendar. It is not recommended to adjust, the date between 20.00 and 06.00, because at this time involved a mechanism for automatic adjustment date. Translation pointers calendars manually in this position arrows may damage the mechanism. Date changes should be made, relegating pre-clockwise to lower sector of the dial (for example, to position 6 (18.00) hours).
  • Chronograph watches. In most cases, these watches contain the "start/stop" button and "reset" button. It is strongly recommended not to press the "reset" if the chronograph is running. Before you use the "Reset" button need to stop the chronograph by button "start/stop". Using the "reset" when running chronograph can damage the mechanism of most models of watches.

PAYMENT

  1. Total amount due includes the final auction price plus Shipping.
  2. Shipping will be determined based upon the SHIP TO address. PLEASE NOTE: Shipping does not include duties, local taxes or any other importation fees.

SHIPPING

We ship to any country. This item will be shipped to you from Europe (Ukraine) via registered airmail with tracking number and insurance within 7-14 days (except for the weekends and holidays) after the payment is fully received.

Typical Delivery Time

          • European Countries: about 7-10 days;
          • USA, Japan & other: about 10-14 days.

NOTE: Delivery time may increase because of postal services and/or customs. Please, don't worry and check location of your parcel using provided tracking number. In spite of delays all our previous lots have been successfully delivered!

The item will be packed very carefully!

RETURNS/REFUNDS

  1. You have 3 days to contact us and 5 days to return it from the date it was received. If this item is in your possession more than 3 days, it is considered used and we will not issue you a refund or replacement. There are no exceptions!
  2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and your eBay ID.
  3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, after both Buyer and Seller cancel the transaction from eBay or you may choose to have a replacement.
  4. Return shipping is to be paid by the Buyer.

FEEDBACK

We maintain high standards of excellence and strive for 100% customer satisfaction! Positive feedback is very important to us. We request that you contact us immediately before you give us neutral or negative feedback, so that we can satisfactorily address your concerns. It is impossible to address issues if we do not know about them!

Thank you for your interest in our products!

Please let me know if you have any questions.

Good luck!