Specifications

Condition: 100% new

Color: White/Black

Material: ABS

Size: As picture shows

I

tem included:

3 x camera wall mounts(Without screws)

Compatible with: fit for Arlo camera, CCTV, DVR or others camera with same interface.

Only the above package content, other products are not included.

Note:

1) All dimensions are measured by hand, there may be small deviations.

2) Color may vary slightly due to the color setting of each individual monitor.

Feature:

1) 100% new with good quality.

2) Supports 360 rotation, 90 degrees tilt. You can achieve any angle you want.

3) The distance of bottom screws mounting hole is about 43mm.

4) They work well for the cameras and can supports up to about 5 lbs of weight.

Wall mount install instruction：

1) Before installation, considering what environment and what angle your camera will install then blend the pole to whatever angle you want. (If it's too hard to bend, you can anticlockwise turning the base to loose the top of the mount)

2) You need to clockwise rotate the base to fix the position you have chosen, until it can't be rotated anymore.

3) Find a place where you would like to mount your cam and drill holes at the appropriate places, insert the wall plugs, and screw in the wall mount. (In order to confirm that the gap part is kept upwards, it is necessary to tighten the bracket to see the specific orientation)

4) There is a hole at the bottom of the camera, you just need to put it upon the screw, adjust to the appropriate angle and then tighten the bracket to hold the lens angle. Finally, roll the reel to fix the camera.