ADF5355 Module Touch Color Screen LCD Sweep RF Signal Source VCO Microwave Frequency Synthesizer PLL
|
|
|
|
Descriptions:
- ADF5355 combines with external loop filter and outer reference frequency to use.It can achieve decimal N frequency division or round number N frequency division phase-locked loops (PLL) frequency synthesizer.
- The microwave broadband VCO deign achieves 6.8 GHz~13.6 GHz working frequency allowed in a RF output.
- A series of frequency divider for other frequency output can achieve 54 MHz~6,800 MHz working frequency.
- ADF5355 has integrated VCO and the fundamental output frequency range is 3400 MHz~6800 MHz.In addition,VCO frequency can be conducted 1,2,4,8,16,32 or 64 frequency division.
- So the user can produce 54MHz RF output frequency.For the requiring isolation applications,RF output stage can be mute.
- The mute function can be controlled both through pins and software.
- All the on-chip register are controlled through simple three-linear interface.ADF5355 uses 3.15 V~3.45 V analog as well as digital power to work with 4.75 V~5.25 V charge pump and VCO power supply.
- Besides,ADF5355 has built-in hardware and software power saving mode.
- RF output frequency range:54 MHz~13,600 MHz decimal Fractional-N Frequency Synthesizer and round number N frequency division synthesizer
- High resolution 38 bits modulus
- The working frequency has rised up to 125 MHz Phase Frequency decetor (PFD)
- Reference frequency is up to 600 MHz
- Within −40°C~+85°C range maintain frequency locking.
- Low phase noise voltage controlled oscillator (VCO)
- Programmable 1/2/4/8/16/32/64 frequency division output
- Analog and digital power supply:3.3 V
- Charge pump and VCO power supply:5 V (typical value)
- Logical compatibility:1.8 V
- Programmable dual modulus prescaler:4/5 or 8/9
- Programmable output power
- RF output mute function
- Analog and digital locked detector
- Note:The above is chip description not the module function description.
Module Features:
- ADF5355 High frequency signal source colour screen module
- ADF5355 PCB beautiful appearance
- Output frequency range:A+ãA-output:250M-6.8G,B output (Double A frequency output)6.8G-13.6G
- A output terminals output frequency resolution is 10Khz.
- Power supply method:5V power supply,it can be directly charged by USB.
- Colour screen display,touch screen operation,you can achieve point frequency and sweep frequency (Note:Don't tear off the protective film on the display screen.Because the touch screen is resistance screen and scratching will causes the touch functions disabler )
- The module has save function and it can storage the setting parameters.
- Module actual measured waveform
500M,1Ghz,2Ghz,3Ghz,4Ghz,5Ghz,6Ghz,7Ghz,7.8G,
- Module application
- Wireless Infrastructure (W-CDMA,TD-SCDMA,WiMAX,GSM,PCS,DCS,DECT)
- Point to point/point to multi-point Microwave link
- Satellite/V-SAT
- Test equipment / instrument
- Clock generation
|
|
|
|
|
|
|
Shipping
- Item will be shipped within 2-3 business days of cleared payment via Post Airmail.
- We only ship to buyer's PayPal address, please confirm your address on PayPal before you bid.
- Registered air mail takes 10-20 business days to most Countries: US, Canada, UK, Australia and Europe.
- Optionally, Express Shipments with tracking service via EMS/DHL/UPS takes 5 to 10 business days.
- We would post the tracking number on the order page as soon as it's available.
|
|
|
Important Note:
- If you have any concern about the purchase,PLEASE feel free to contact us first, we're always ready to help.
- Please kidly note that this is international shipping, delay happens occasionally due to unexpected cases.
- Any customs tax applied to the parcel should be convered by the buyer.
- Please remember to write your phone number which is necessary for the shipping.
|
|
|
Payment
- We only accept PayPal.
- Payment must be made within 7 calendar days of the auction end time. Non-Paying bidders will be reported.
|
|
|
Refund
- It is buyer's responsibility to contact us within 30 calendar days of receiving a defective product. Otherwise, no replacement or refund will be made. All items MUST be returned in their original condition.
- Buyer is responsible for shipping and proof of delivery on all returns.
|
|
|
|