Descriptions:

• ADF5355 combines with external loop filter and outer reference frequency to use.It can achieve decimal N frequency division or round number N frequency division phase-locked loops (PLL) frequency synthesizer.
• The microwave broadband VCO deign achieves 6.8 GHz~13.6 GHz working frequency allowed in a RF output.
• A series of frequency divider for other frequency output can achieve 54 MHz~6,800 MHz working frequency.
  
• ADF5355 has integrated VCO and the fundamental output frequency range is 3400 MHz~6800 MHz.In addition,VCO frequency can be conducted 1,2,4,8,16,32 or 64 frequency division.
• So the user can produce 54MHz RF output frequency.For the requiring isolation applications,RF output stage can be mute.
• The mute function can be controlled both through pins and software.
  
• All the on-chip register are controlled through simple three-linear interface.ADF5355 uses 3.15 V~3.45 V analog as well as digital power to work with 4.75 V~5.25 V charge pump and VCO power supply.
• Besides,ADF5355 has built-in hardware and software power saving mode.
  
• RF output frequency range:54 MHz~13,600 MHz decimal Fractional-N Frequency Synthesizer and round number N frequency division synthesizer
  
• High resolution 38 bits modulus
  
• The working frequency has rised up to 125 MHz Phase Frequency decetor (PFD)
  
• Reference frequency is up to 600 MHz
  
• Within −40°C~+85°C range maintain frequency locking.
  
• Low phase noise voltage controlled oscillator (VCO)
  
• Programmable 1/2/4/8/16/32/64 frequency division output
  
• Analog and digital power supply:3.3 V
  
• Charge pump and VCO power supply:5 V (typical value)
  
• Logical compatibility:1.8 V
  
• Programmable dual modulus prescaler:4/5 or 8/9
  
• Programmable output power
  
• RF output mute function
  
• Analog and digital locked detector
  
  
• Note:The above is chip description not the module function description.

Module Features:

• ADF5355 High frequency signal source colour screen module
• ADF5355 PCB beautiful appearance
• Output frequency range:A+、A-output:250M-6.8G,B output (Double A frequency output)6.8G-13.6G
• A output terminals output frequency resolution is 10Khz.
• Power supply method:5V power supply,it can be directly charged by USB.
• Colour screen display,touch screen operation,you can achieve point frequency and sweep frequency (Note:Don't tear off the protective film on the display screen.Because the touch screen is resistance screen and scratching will causes the touch functions disabler )
• The module has save function and it can storage the setting parameters.
• Module actual measured waveform
  500M,1Ghz,2Ghz,3Ghz,4Ghz,5Ghz,6Ghz,7Ghz,7.8G,
• Module application
• Wireless Infrastructure (W-CDMA,TD-SCDMA,WiMAX,GSM,PCS,DCS,DECT)
• Point to point/point to multi-point Microwave link
• Satellite/V-SAT
• Test equipment / instrument
• Clock generation