Kit of pre-curved reflective reflective stickers for you look for, with these stickers your car will be even more beautiful and aggressive and especially at night you will be more visible to other vehicles in dark areas and therefore safer! (all reflective stickers in general to be visible at night must be illuminated by an external light beam projected at a certain angle, as for example happens at night with road signs illuminated by car headlights, in the absence of light the effect reflector does not activate). The kit you will receive consists of 12 strips, all you need for the complete decoration of the 4 sides of the rims, plus 2 FREE pieces to be used as a spare in case of error during application, these stickers are not like the classic rolls with very common straight adhesive strips on the market difficult to apply! but they are already curved, easy to apply and quick to assemble without necessarily having to disassemble the wheels, for a guaranteed result, significantly improving the aesthetics of your car.

Features:

These adhesive strips are carved with high-quality reflective films among the best on the market, very resistant, with only 60 - 70 microns thick, ensure perfect adhesion and exceptional durability even in hostile conditions, such as for example frost, high temperatures, dirt, chemicals and other harmful agents. If you want to remove these stickers, just heat them with a bodywork heat gun without damaging the rim enamel.

Before buying this kit:

1) Check how many inches your car's rims are, usually the inches are written in the tires, then select the desired size in this ad!

2) check if your rims have a regular edge where a strip can be applied, some types of rims have spokes that reach the outer perimeter of the rim and do not have enough flat space to accommodate an adhesive strip.

3) Check what thickness of the rim you can mount on your rims, a too high thickness could also overlap above the spokes of the rim creating an uneven outer edge of the adhesive, so in this ad you can also select the thickness of the adhesive strips.

Tips on how to apply this kit on the rims of your car:

1) Carefully wash the rims with common car shampoo, do not use chemical additives or polishing, oily, silicone and other chemical agents that could weaken the glue of the adhesives, but only neutral shampoo!

2) Dry the rims perfectly, no traces of water should remain on the edge.

3) Avoid applying the stickers in a cold environment, but if the work will still be done in a cold environment, heat the rim surface with a heat gun before applying the stickers! hot applied adhesives adhere better!

4) Apply the first strip in any point of the circle, accompanying it along the edge with the thumb of the hand (for each circle, 3 crescent-shaped strips must be applied which joined together will form the complete circle). at least 2 mm then at the end cut out the excess of the third strip that completes the circle.

5) Use the heat gun again to warm up the adhesives already applied by rubbing them with your fingers.

6) Repeat the same operation for the other 3 remaining circles.

7) If you have any problems with the kit we sent you, please do not rush to hasty solutions by entering a negative comment, but contact us immediately and we will find a solution together. Thank you.

Some examples: