WHY CHOOSE THE BZ700 OBD2 SCANNER?
- Full Systems Diagnostics:Not only read and clear fault codes of the main systems (engine, airbag, transmission, ABS, SAS, SRS, EPB, DPF, TPMS, etc.), but also supports body, chassis, powertrain and all control modules.
- 9+ Multiple Reset Service: Transmission adaptation, Battery Registration, Battery Voltage Test, Throttle Relearn, ABS Bleeding, TPMS Reset, EPB Reset, SAS Reset, Oil Reset etc.
- Auto VIN Quick Test: Auto VIN technology can automatically identify model and year information in no time.（Only Mercedes Benz is supported）
- Support 10 Languages: English, German, French, Spanish, Russian, Portuguese, Finnish, Danish, Swedish, Norwegian.
- Support all Mercedes Benz/Sprinter/Smart with OBD2 interface 16PIN from 1991 to 2022.
PRODUCT DESCRIPTION
Display: 2.8″ TFT LCD, 320X240 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage:8V-18V
Operating Temperature:0C-60C(32-140F)
Storage Temperature:-20℃-70℃(4-158F)
Dimension: 6.8*3.38*1.22 inches (L x W x H)
What's in the box?
1*BZ700 OBD2 Scanner
1*Data Line
1*User's Manual
9+ Special Functions
- Transmission adaptation : This function supports routine maintenance of transmission modules, for example, reset adaptation values, adjust the oil level.
- Battery Registration : To put it simply, battery registration is a process of updating your vehicle with information that a brand new battery has been installed in your car.
- Battery Voltage Test : Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
- Throttle Relearn : Relearns the throttle valve control value while clear or replaces the throttle value.
- ABS Bleeding : Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
- TPMS Reset : Allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS reset after tires sensors are replaced or rotated.
- EPB Reset :System maintenance deactivates and reactivates the EPB system for replacement and initialization.
- SAS Reset : Allows you to perform adjustment of the steering angle sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor. After calibrate sensor successfully, its fault memory will be automatically cleared.
- Oil light Service Reset : Support service lamp reset, reset service mileage and service intervals.
PROFESSIONAL-LEVEL DIAGNOSTICS FITS FOR MERCEDES BENZ DIESEL VEHICLES
Diesel Particulate Filter (DPF) Regen: Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
ADblue Reset：Some diesel vehicles may need to add urea, and the urea warning light needs to be reset after the addition is complete.
Injector Coding: Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed.
Fuel Pump Activation：Diesel vehicles perform this function when the new fuel pump needs to be emptied or the fuel tank needs to be emptied after the fuel pump is replaced.
and more ....
* Live Data Stream : Reads abundant live data stream and freeze frame data to monitor the operating status of the vehicle, including the status of the fuel system, engine coolant temperature, RPM and various sensor parameters.
* Smog Check :The purpose of the readiness monitors is to test the emission control systems of the vehicle itself. The monitors are also known as emission monitors. * Determine if your vehicle is ready for a smog test.
* Evap System Test : The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
* Vehicle Information : The option displays the vehicle identification number (VIN),the calibration verification number (CVN), and other information of the test vehicle.
Lifetime Free UPDATE:
Download the update software and unzip the file.
Connect the device to the computer via USB cable.
The update software is only supported by 7/8/10.In Windows 7, you need to install the driver,in Windows 8/10,you can run the update software directly.
Note: Windows XP and Apple computers do not support upgrades.
