ANCEL AD310 is a great upgrade from more basic diagnostic code readers. The major function of this scanner is detecting the Engine System, reading and erasing error codes.

What is Wrong with the Car ? and Why Choose ANCEL AD310?

1.Classic design, fast scan and erase trouble codes, even a beginner can use it read the error code, find out what the problem is and perhaps fix it. Save money and time.

2.Works on MOST 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports English, German, French, Spanish, Finnish, Dutch, Russian and Portuguese.

3.Easily determines the cause of the check engine light. I/M monitor readiness test, turn off the MIL (check engine light) as well as view freeze frame data. Read hard (memory) / pending (intermittent) and historic codes and show definitions.

4.The AD310 scanner is well built with a large LCD display (128 x 64 pixel) that has white backlight and contrast adjustment, indicates test results directly. No need any Batteries or Charger, gets the power directly from the OBDII Data Link Connector in your vehicle.

5.It's equipped with a 2. 5 feet long cable and made of a very thick flexible insulator. There are 4 buttons on AD310. The Up and Down button for scrolling the menu, the Enter and Exit button allow for navigation back and entering menu.

ANCEL AD310 Support Multi-Language

English, German, French, Spanish, Finnish, Dutch, Russian and Portuguese.

ANCEL AD310 Support Car Models

AD310 Support 12V Diesel , Gasoline Car, Do NOT Support Hybrid, Electrical Car

American Cars

Compatible with Standard OBD2 Cars from 2001 to Now:
for Chrysler, for Ford, for GM, for Jeep

European car

Compatible with Standard OBD2 Cars from 2004 to Now:
(if you car is Opel in 2004, 2005, 2006, please ask us first)
for Alfa Romeo, for SAAB, for Acura, for Opel, for Audi, for Seat, for Peugeot, for Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Citroen, for Volvo, for Fiat, for VW, for Ford, for Jaguar

Japanese car

Compatible with Standard OBD2 Cars from 2005 to Now:
(if your car is in 2004 2005 2006 release , please ask us first)
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai, for Dacia, for Lexus , for Mazda, for Nissan, for Subaru, for Suzu

France Car

for Renault after 2006
Not Support for Renault Clio 2 / Renault Megane / Dacia Logan / Renault Logan

Chinese car:

Compatible with Standard OBD2 Cars from 2008 to Now:
for BYD, for Chery, for Geely, for Great Wall, for Karry

NOTE:

Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. Especially Japanese and Korean car brand.

Please Leave us message in below format,we will reply you within 8 hours.For Example: Nissan, 2005, 2.0cc, Diesel,is it suit?

Warning:

Not Support Russian Cars, VAZ,UAZ,LADA
Not works with Trucks, Pickups, Vans
For Ssangyong Actyon from 2009 to 2017 years.
For Ssangyong Korando 2.0 TD Diesel , from 2013 to 2017 years.
For Ssangyong Kyron 2.0 Diesel , from 2010 to 2017 years.
For Ssangyong Rexton 2011 to 2017 years

OBD2 Check--Make a Better Detection for Car Engine System!

ANCEL AD310 is with complete OBDII/EOBD diagnostic functions and meets protocols such as ISO9141, KWP2000, J1850 PWM, J1850 VPW and CAN.
This is specifically designed for the engine called the "car heart". It is necessary to keep an eye on the engine status to ensure the efficient operation of the engine to ensure your travel safety. In addition, it can also be used before you send the car to the emission test. great for daily repair work. The table below describes the purpose of each mode of operation:

1. Read Code

Read DTCs (Diagnostic Trouble Codes) to locate the issues

2. Erase Code

Clear DTCs to turn off the Check Engine Light after certain repairs

3.Live Data

Display real-time data of the emission-related Engine system

4. Freeze Frame

View the data recorded when an emission-related fault occurs

5. I/M readiness

Read I/M readiness status to have a vehicle inspected for state emissions compliance

6. Vehicle Information

Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

DTC Lookup

enables you to view the detailed definition of the retrieved DTC

Reset Check Engine Light

Turn off Check Engine Light, Find out what s wrong with your car and perhaps fix it. Save money and time.

How to get started?(How does the ANCEL AD310 diagnostic scanner function?)

Simply plug into the OBD II port on your car and turn ignition on and you ready to go. Also, ensure that it is a 16 PIN OBD2 protocol and 12V vehicle battery. The good thing is that you won’t need a battery or charger to start the ANCEL AD310 OBD2 diagnostic code reader.

The following are two correct usage methods:

A - Key operation:
1. Turn the ignition on without starting the car;
2. Start the car.

B - Keyless operation:
1. Press the start button and then press again but don't press the brake pedal, the dashboard has already powered up. Then plug the tool and read;

2. Press the brake pedal and press the start button to ignition start.

ANCEL AD310 Packing List

1* Ancel AD310
1* User Manual
1* Usb Cable

FAQ

Q: Where's the OBDII interface?

A: The OBD2 port is often under the dash, or under a panel below the handbrake in the central console.

Q: Why I can't erase the fault code?

A: The fault causing the fault code to show will need to be repaired first then code can be erased.

Q: Will it diagnose abs or srs?

A: Hi, the major function of this AD310 scanner is detecting the Engine System, read and clear the error codes. Sorry, it can not diagnose ABS or SRS.

Please Note:

Works on vehicles with 12V battery only;
Must be standard OBD II protocol (16pin port).