4 Stroke 4HP Heavy Duty Outboard Motor Jet Pump Boat Engine w/ CDI System 55cc
Note:Our machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself.
Product parameters:
Model: 4.0 horsepower jet pump
Displacement: 55cc
Transmission ratio: 2.08 (27:13)
Number of cylinders: 1
Speed: 4500-5500 rpm
Gear shift: clutch
Packing volume: 95*42*29cm
Ignition system: CDI
Cooling system: wind cooling
Control system: tiller control
Start mode: manual start
Refueling method: No. 92 unleaded gasoline is recommended
Gross weight/net weight: 13/9.7kg
Bore*Stroke: 44*33mm
Recommended engine oil: four-stroke engine oil
Tilt angle system: manual tilt
Size: 855*365*220mm
Standard fuel tank: built-in 1.4l
Adapted stern board height: 440mm
Precautions:
1. Use four-stroke special engine oil (automobile and motorcycle engine oil);
2. Add oil according to the scale indication on the oil dipstick (the rotating cover), do not add more or less;
3. The fuel tank of the four-stroke outboard engine can only be filled with No. 92 pure gasoline;
4. Gently press the oiler on the carburetor until the oil flows to the top of the transparent oil pipe;
5.Machines below 6 horsepower have no reverse gear and can rotate 360 degrees, and the machine head rotates 180 degrees to be reverse gear;
6. The running-in period is about 10 hours or one month. Do not drive at high throttle during the running-in period;
7. Change the engine oil and gear oil after the running-in period, and the second change time is about 100 hours or six months later;
8. The machine must be erected in a reliable place when not in use;
packing list:
Instruction + Toolkit + Spark Plug Sleeve + Funnel
1X motor
Standard-Kraftstofftank: eingebauter 1,1L
Schub: 1000 Pfund, mit einer Geschwindigkeit von etwa 4-6 Kilometern pro Stunde (je nach Umgebung, Wassergebiet und Schiffslast kann die Geschwindigkeit variieren)
Höhe der Heckplatte: 380-440mm
1. Verwenden Sie viertaktiges Spezialmotorenöl (für Außenbordmotoren und Motorräder);
2. Öl entsprechend der Skalenanzeige auf dem Messstab (rotierende Abdeckung) hinzufügen und etwa 350 Milliliter hinzufügen;