ModuleMe Electronic

Features:

1. High quality materials are used, and the product quality is packaged

2. Exquisite and compact appearance, with beautiful arrangement of components

3. Simple, convenient, and fast current setting, easily addressing the issue of LED current differences between different panel backlight modules

4. This product only has constant current and not constant voltage. The voltage will automatically adjust to the corresponding voltage according to the needs of the light strip

5. Widely used, suitable for 14-65 inch LED TVs, monitors, and more

Parameter:

Input voltage: VCC40-165V, VIN12-24V

Output current: 55-255V adaptive

Current output: Constant current output 200mA

Usage:

The default output is 200MA, and the corresponding current value can be increased by short-circuit solder joints (on the basis of 200mA). Be careful not to increase the current too much at once to avoid burning out the light strip.

Installation precautions:

1. Connect voltage to VCC at the positive electrode of the filtering capacitor rectified from the integrated power supply board for the backlight board, with a voltage range of 45-165V

2. Connect 12-24V voltage to VIN, do not connect high voltage above 45V. VIN must be connected

3. Connect the power supply ground wire to GND

4. NC is empty and not accepted

5. Find the switch signal on the original power board and connect it to ON/OFF, with a reference range of 2.5V-5V

6. Connect the original dimming signal to the VADJ pin, where 5V is the darkest and 0V is the brightest

Package include:

Constant current boosting board * 1