• Fits:  
    • 2013-2018 Ford Fusion
    • 2013-2018 Lincoln MKZ
     
  • What is an ABS Sensor?
  • The anti-lock braking system uses an ABS sensor or wheel sensor to monitor the wheel speed and send this information to the ABS computer. The ABS computer uses this information to prevent the brakes from locking during an emergency stop. Without ABS, a wheel will automatically lock up in slippery and/or gravel-like conditions, as well as potentially experience a loss of directional control and vehicle stability.
  •  
  • Where are these Sensors Located?

    • For 2013-2018 Ford Fusion Lincoln MKZ Front Right Side ABS Speed Sensor Assembly

    Fits:  

    • 2013-2018 Ford Fusion
    • 2013-2018 Lincoln MKZ

     

    What is an ABS Sensor?

    The anti-lock braking system uses an ABS sensor or wheel sensor to monitor the wheel speed and send this information to the ABS computer. The ABS computer uses this information to prevent the brakes from locking during an emergency stop. Without ABS, a wheel will automatically lock up in slippery and/or gravel-like conditions, as well as potentially experience a loss of directional control and vehicle stability.

     

    Where are these Sensors Located?

    The ABS sensor is typically located in each wheel hub/rotor on a four channel ABS system. Some rear wheel drive applications have the sensor mounted in the rear differential.

     

     

    Features:

    • Built to strict quality control standards
    • 100% Brand New ABS speed sensor
    • Non-breakable Seismic Capacity
    • Plugs into existing body mounted ABS harness
    • Drop in fit for easy installation
    • 1 Year Warranty

     

    Symptoms of a Bad or Failing ABS Sensor:

    • The ABS Warning Light Glows
    • The Brakes Lock Up
    • An Unresponsive Brake Pedal
    • Increased Pedal Effort
    • Speedometer Failure

     

    If any of the warning lights above are illuminated, there is brake pedal judder while braking at low speeds or the wheels lock up while braking, then there is probably a fault somewhere within the ABS system.Please replace it immediately！

     

     

    How to Replace an ABS Speed Sensor?

    Materials Needed:

    •  Brake cleaner
    •  Jack stands
    •  Ratchet
    •  Sil-Glyde
    •  Socket set
    •  Wrench set

     

    Install the ABS Speed Sensor:

    Step 1: Gain access to the sensor.

    Step 2: Remove the sensor.

    Step 3: Take note of the sensor wire routing.

    Step 4: Clean the sensor mounting hole.

    Step 5: Clean the tone ring of all fine metal.

    Step 6: Insert the sensor into its mounting hole.

    Step 7: Route the sensor wire along the correct path.

    Step 8: Connect the sensor connector to the vehicle connector.

    Step 9: Clear the code and test drive your vehicle.


    Item Specifics
    Brand everpartstorecs
    Placement on Vehicle Right
    Manufacturer Part Number 10166468
    Custom Part Number DG9Z-2C204-B,DG9Z2C204B
    Alternate Part Number abs sensor front
    Superseded Part Number ALS2596
    Vintage Car Part No
    Package Contents 1 x ABS wheel sensor
    Items Included Traction Control Pressure Sensor
    Manufacturer Warranty 1 Year
    Performance Part No
    Color Black
    Universal Fitment No
    Package Type Box
    Housing Material Plastic
    Fitment Type Direct Replacement
    Terminal Quantity 2
    Mounting Hardware Included No
    weight 1 Lb
    Finish Polished
    Item Height 5.5 cm
    Wiring Harness Included Yes
    Width 9 cm
    Mounting Style Snap-On
    Material Plastic
    Number in Pack 1
    Terminal Type Mini-Blade
    Connector Type Female
    Mounting Location Spindle
    Connector Quantity 1
    Terminal Gender Male
    Connector Shape Rectangular
    Type Traction Control Pressure Sensor

    Shipping

    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Payment

    PayPal preferred.

     

    Other payments accepted by ebay also can be accepted.

    Service

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    Note

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

    Shop Category
     Store Home
     lift support
     Condenser
     Air Diesel Heater
     Blower Resistor
     Blower Motor
     Heater Core
     Suspension Kits
     Thermostat Housing
     ABS Wheel Speed Sensor
     Window Switch
     Oxygen Sensor
     3Rd Brake Light
     Mass air flow sensor
     AC Compressor
     Cooling Fan
     Towing Mirrors
     Door Handle
     Roof Rack
     Radiator
     Sensor
     Knock Sensor
     Catalytic Converter
     Other

    For 2013-2018 Ford Fusion Lincoln MKZ Front Right Side ABS Speed Sensor Assembly

    Fits:  

    • 2013-2018 Ford Fusion
    • 2013-2018 Lincoln MKZ

     

    What is an ABS Sensor?

    The anti-lock braking system uses an ABS sensor or wheel sensor to monitor the wheel speed and send this information to the ABS computer. The ABS computer uses this information to prevent the brakes from locking during an emergency stop. Without ABS, a wheel will automatically lock up in slippery and/or gravel-like conditions, as well as potentially experience a loss of directional control and vehicle stability.

     

    Where are these Sensors Located?

    The ABS sensor is typically located in each wheel hub/rotor on a four channel ABS system. Some rear wheel drive applications have the sensor mounted in the rear differential.

     

     

    Features:

    • Built to strict quality control standards
    • 100% Brand New ABS speed sensor
    • Non-breakable Seismic Capacity
    • Plugs into existing body mounted ABS harness
    • Drop in fit for easy installation
    • 1 Year Warranty

     

    Symptoms of a Bad or Failing ABS Sensor:

    • The ABS Warning Light Glows
    • The Brakes Lock Up
    • An Unresponsive Brake Pedal
    • Increased Pedal Effort
    • Speedometer Failure

     

    If any of the warning lights above are illuminated, there is brake pedal judder while braking at low speeds or the wheels lock up while braking, then there is probably a fault somewhere within the ABS system.Please replace it immediately！

     

     

    How to Replace an ABS Speed Sensor?

    Materials Needed:

    •  Brake cleaner
    •  Jack stands
    •  Ratchet
    •  Sil-Glyde
    •  Socket set
    •  Wrench set

     

    Install the ABS Speed Sensor:

    Step 1: Gain access to the sensor.

    Step 2: Remove the sensor.

    Step 3: Take note of the sensor wire routing.

    Step 4: Clean the sensor mounting hole.

    Step 5: Clean the tone ring of all fine metal.

    Step 6: Insert the sensor into its mounting hole.

    Step 7: Route the sensor wire along the correct path.

    Step 8: Connect the sensor connector to the vehicle connector.

    Step 9: Clear the code and test drive your vehicle.



    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    PayPal preferred.

     

    Other payments accepted by ebay also can be accepted.

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.