Simple to fit underneath this provides a means of rotating the Peco turntable
Includes:
Motor/Gearbox with ready fitted worm and wires with plugs for electrical connection
Shaft
Gear with boss
Gear securing screw with Allen Key
Bolts and Nuts to secure to the turntable base
Full fitting and electrical connection instructions
No track alignment is provided as the tracks can be positioned anywhere around the turntable.
It is possible to drive this like a locomotive and align with the outlet tracks by eye
There are two options to power the Motor Drive:
Option 1: use the existing control you use to drive the locomotive and divert the power using a double pole double throw switch.
Option 2: use battery power with a switch.
We offer a "Plug-and-play" system to facilitate either option (see below)
Instructions are provided. For best results this should be fitted whist the turntable is being constructed.
Please note this does not include the turntable which must be sourced elsewhere.
The picture shows the motor mounted with the turntable turned upside down
Option 1: Using existing power supply Option 2: Using battery power
This is a "plug-and-play" system (no soldering required)
For Option I you will need a Double Pole Switch and Extension Leads
For Option 2 you will need Battery Box, Switch and any Extension Leads.
The Motor and Switches have 30cm long Leads and the Battery Box has a 15cm long lead.
Prices are:
Double Pole Switch (with 30cm leads) £7.99
Battery Box for 2 x AA (with 15cm leads) and Switch (with 30cm leads) £9.99
Extension Leads are available in 30cm length @ £3.99 per pair or 100cm length @ £2.99 each.
Please choose you preferred option from the drop down box
Please check carefully that you select the correct item(s)
Please contact us if you require advise.