Description:
Brand new and high quality
The LilyPad Iduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread.
The LilyPad Iduino can be programmed with the software .
The ATmega328V on the LilyPad comes preburned with a bootloader that allows you to upload new code to it with the software. You can also bypass the bootloader and program the ATmega through the ICSP (In-Circuit Serial Programming) header.
The LilyPad should only be programmed with software versions 0010 or higher. You can program it with earlier versions, but all of the time related functions will be switched off (making them twice as slow as they should be).
Warning: Do not power the LilyPad with more than 5.5 volts, or plug the power in backwards: you'll kill it.
328 Main board;
The Digital I/O Digital input/output terminal, a total of 0 ~ 13;
The Analog I/O Analog input/output terminal, a total of 0 ~ 5;
Support the ISP download function;
Support the TX/RX terminals;
Support the AREF terminals;
Support the six groups of PWM terminal (Pin11 Pin10, Pin9, Pin6 and Pin5, responsible);
The input voltage: 3.3 V DC;
Using Atmel Atmega328V - 20 pu microcontroller;
Specifications:
Microcontroller: ATmega328V
Operating Voltage: 2.7-5.5 V
Input Voltage: 2.7-5.5 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 6
DC Current per I/O Pin: 40 mA
Flash Memory: 16 KB (of which 2 KB used by bootloader)
: 1 KB
EEPROM: 512 bytes
Clock Speed: 8 MHz
Package included:1pcs LilyPad atmega 328 Main board
