Features

*This constant voltage constant current CNC DC automatic step-down power supply is very suitable for applications in fields such as solar charging, computer power modification, DIY desktop CNC small power supply, etc.

*It is equipped with a full-view dedicated power supply LCD, large-screen display, the status is clear at a glance, easy to operate, and very smooth to use

*The input voltage range of this power supply is 6.0-70.00V, the output voltage range is 0.0-60.00V, the output current range is between 0.0-20.00A, and the maximum output power is 1200W (the product is DC power supply, not AC 220V power supply)

*It also has a variety of protection mechanisms, such as under-voltage protection, over-voltage protection, over-current protection, over-temperature protection and over-power protection, etc., to ensure safety during use.

*On the running interface, a short press of the encoder button allows the user to easily view parameters such as power (W), capacity (Ah), energy (Wh) and time (h). In addition, press and hold the encoder button for 2 seconds to lock the set voltage and current to prevent misuse; after locking, press and hold the encoder button for 2 seconds to unlock

*Support serial communication, standard MODBUS protocol

*The bottom board can be used independently. The output current is 0-20A. The output voltage can be set by the dial switch, and the voltage can be set to fix the output: 5V/9V/12V/24V/36V/48V/60V

Specification

Product name: CNC DC regulated power supply

Product model: XY6020L

Input voltage: 6.0~70V

Output voltage: 0.0-60V

Output current: 0~20.00A

Output ripple typical value: 100mv VPP

Output power: 0-1200W

Maximum output voltage: (input voltage ÷ 1.1) -2

Input voltage measurement resolution: 0.01V

Output voltage setting measurement resolution: 0.01V

Current setting measurement resolution: 0.01A

Input voltage measurement accuracy: ±1%+5 characters

Output voltage setting and measurement accuracy: ±0.4%+1 digit

Output current setting and measurement accuracy: ±0.5%+3 digits

Cooling fan on: current>2A, power>50W, temperature>50℃

The cooling fan is turned on and then turned off: current <1.5A, power <45W, temperature <45°C

protection mechanism

External temperature protection: 0--110 ℃ default off

Input overvoltage protection: 71V default

Input undervoltage protection: 4.8-71V adjustable, default 4.8V

Output overvoltage protection: 65V default 65V

Output overcurrent protection: 0-22A default 22A

Output over-power protection: 1250W default 1250W

Over-temperature protection: 60--110°C default 95°C

Timeout protection: 0-100H adjustable, default off

Overcapacity protection: 0~9999AH adjustable, default off

Super energy protection: 0~9999WH adjustable, default off

Packing list

1*CNC DC regulated power supply

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2. Please allow slight manual measurement deviation for the data.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.