300bar Hochdruckluftpumpe Elektrische Pcp Luft Kompressor Hochdruckluft 4500psi

Attention：
Please Replace the Breathing Nozzle Before Using the Machine 
 
Specifications: 
Material: All Copper Motor
Voltage: 220 V / 50hz
Current: 16 a
Motor Power: 1.8 Kw
Working Pressure: Max 400bar/30mpa/4500psi (Suggest:25-30mpa)
Air Flow Rate: 50 L/Min
Revolving Speed: 2800 R/Min
Noise: 78 Db（Max）
Cooling System: Water Cooling/Air Cooling
Size（L*W*H)：34 X 18 X 37 Cm/13.4" X 7" X 14.5"
Plug: Us Plug
Power Line Length: 1.5 M
Lubrication Mode: Splash Type
Compression Stage: Two Stage
Package Weight: 17 Kg

Main Scope of Application:
Automobile, Diving Bottle, Industrial Bottle

Features:
1.Long Life, Safety Explosion-proof.
2.Use Imported Super Wear Piston Ring.
3.Integral Cylinder Head Without External Gas Path Pipe.
4.with Internal Water Separation Configuration
5.Cooling Is Better,Max Support 0.5l
 

Package Included:
1 X Electric Compressor Pump（with One Eu Plug）
1 X Female Head 8 Mm High Pressure Hose
2 X Inlet & Outlet Water Pipe
1 X Water Pump with Sucker Regulator
4 X Combination Pad
5 X Rupture Disc
1 X Oil Breathing Nozzle
1 X Choke Plug
1 X Warranty Card
1 X Suit of Seal Rings

Please Note:
1.We Don't Suggest a Beginner to Try It.
2.You'd Better Make Sure That Your Container Can Bear 30 Mpa Otherwise It Is Not Safe.
3.When the Compressor Working, the Cooling System Must Be Working at the Same Time.
4.the Machine Must Not Be Working Without Oil, so Please Don't Forget to Put Diesel Oil or Engine Oil into the Compressor Before Running. in Addition, You Must Pay Attention to the Level of Oil.
5.When Running, If the Machine Vibrates Violently, Please Add Pad or Towel Under the Compressor.
6.Please Add Lubricating Oil Before You Start Using the Machine First. No.46 Wear Resistant Hydraulic Oil. Don’t Forget to Put the Lube Oil into the Compressor Before Running.