This set of three fins has heaps of surface area and the moderate sweep (rake), full tip and longer base deliver incredible drive and speed, while the stabilizer adds control when needed. Pro Glass fins are made from solid fiberglass, are rigid and provide immediate response and power with predictable performance outcomes.

Dimensions: Side fins Depth 5.4” 137mm Foil flat inner face. Tab 3/4” Stabilizer fin Depth 3.5” 88mm Foil 50/50 Tab 1/2”


Explore the whole range at eveleysurf.com

Pro Glass fins are cut from layers of solid fiberglass. These fins are stiff and are widely used by professional level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

The fins are hand laid up with high quality fiberglass cloth. Since they are hand laid, they are optimized for minimal flex which increases speed and projection through turns with predictable and reliable outcomes and integrity of performance.

The machined finish allows the fabric of the fiberglass to remain evident.


Depth is the distance the fin protrudes from the bottom of the board.
The depth of the fin has an important relationship with control and the speed of the board.
Medium depth fins produce reduced drag which increases speed and allows for quick directional changes.

Base:
Base is the length between the leading and trailing edge where the fin meets the board. Base is primarily linked to maneuverability. Fins with a shorter base will offer substantially more maneuverability allowing for more radical surfing.

Tab: 
The part of the fin that goes in the fin box.

Rake:
Rake (also known as Sweep) is the distance the fin tip curves away from the trailing edge of the base. The rake affects the turning ability of the board. The less the tip is offset from the base, the more maneuverable the board will be. Greater rake will produce longer and more drawn out turns.