TOPDON Diagnostic Tool Phoenix Professional Car Bluetooth Wireless Scanner with OE-Level All System Diagnostics, 28 Reset Services, ECU Coding, Bi-Directional Control, Auto VIN, for 10000+ Models 

1.All System Diagnostics for Any System Faults;

2.Compatible with 130+ Vehicle Brands, 10000+ Models Worldwide;

3.28+ Special Functions for Fast Maintenance & Repairs;

4.ECU Coding & Online Coding to Customize Your Cars;

5.OE-Level Diagnostics with Complete Functions;

6.Bi-Directional Control (Active Test) to Locate Issues Accurately;

7.Full OBD2 Functions for Emission Issues;

8.Auto VIN to Identify VIN Automatically;

9.Support AutoAuth for FCA SGW;

10.Topology Module Tree for System Status;

11.Online Feedback for Timely Technical Support;

12.Wireless Bluetooth Diagnostics;

13.Data Print via PC;

14.Graphical Display of Data Stream;

15.Data Playback;

16.10" Touchscreen (1280*800 Resolution);

17.RAM: 4GB, ROM:64GB;

18.2.0GHz Quad-Core Processor;

19.8.0MP Rear Camera with AF;

20. Battery Capacity: 6000mAh;

TOPDON Phoenix Plus, an all-in-one intelligent diagnostic tool, features OE-Level All System Diagnostics, 28 Reset Functions, ECU Online Coding, Bi-Directional Control, Personalization, Auto VIN, etc., offering maximum convenience and efficiency for your diagnosis and analysis. Built with a fast 2.0 GHz 4-core processor, 64GB memory, and 10" touchscreen, Phoenix Plus is the perfect companion for mechanics or technicians.

 

28 Special Functions:

Do car maintenance and repairs fast & safely

1. Oil Reset: Reset the oil life system.

2. Throttle Matching: Initialize the throttle actuators to the default state.

3. Steering Angle Reset: Reset the steering angle to zero to keep the car running straight.

4. Battery Matching: Register the battery after replacement.

5. ABS Bleeding: Help exhaust the air in the Anti-lock Braking System (ABS).

6. EPB Reset: Help replace and reset the brake pad.

7. DPF Regeneration: Remove particulate matter from the DPF filter.

8. Tooth Learning: perform tooth learning after replacing the engine ECU, crankshaft position sensor, etc.

9. Anti-theft Matching: Disable any lost keys and add new keys. *ONLY for vehicles with low-grade anti-theft systems.

10. Injector Coding: Write the new injector code into the car system for correct cylinder injection quantity.

11. Tire Pressure Reset: Reset the tire pressure.

12. Suspension Calibration: Adjust the vehicle body height sensor for level calibration.

13. AFS Reset: Initialize the adaptive headlamp system.

14. A/T Learning: Help complete the gearbox self-learning to improve gear shifting quality.

15. Sunroof Initialization: Initialize the sunroof when locked off or closed.

16. EGR Adaption: Learn the Exhaust Gas Recirculation valve after being cleaned.

17. ODO Reset: Copy, write or rewrite the actual kilometer value in the odometer.

18. Airbag Reset: Reset the airbag data to clear the airbag collision fault indicator.

19. Transport Mode: Deactivate the transport mode.

20. A/F Reset: Set or learn Air/Fuel ratio parameters.

21. Stop/Start Reset: Close or open the automatic start-stop function in ECU.

22. NOx Sensor Reset: Reset the NOx catalytic converter learned value stored in ECU.

23. AdBlue Reset: Reset urea after the diesel exhaust treatment fluid is replaced or filled up.

24. Seat Calibration: Calibrate the memory in replaced or repaired seats.

25. Coolant Bleeding: Activate the electronic water pump.

26. Tire Reset: Set the size parameters of the modified or replaced tire.

27. Windows Calibration: Perform door window matching to recover ECU initial memory.

28. Language Change: Change the system language of the vehicle central control panel.

Note: The features vary in vehicle’s make, model, and year.

 

OE-Level All System Diagnostics

Give a Comprehensive Inspection to your car

TOPDON Phoenix Plus, a system diagnostic tool, can get quick access to all available electronic systems, such as Engine, Transmission, Airbag, ABS, SRS, EPB, Immobilizer, Doors, Air Conditioning, Gateway, TPMS, etc. and perform OE-level diagnostics on every module to find out any system faults and retrieve DTCs related.

ECU Information: read the current version information of ECU;

Read Faults Code: read DTCs in the ECU memory and quickly identify the cause of the vehicle issues;

Clear Fault Code: clear DTCs of the ECU memory of the tested system;

Read Data Stream: read and display the real-time data of ECU in various modes (text, waveform, etc.);

Active Test/Bi-directional Control: accurately figure out whether a specific system, component, or a subsystem in vehicles goes well and pinpoint the location of the problem by interactively operating and testing the vehicle’s related actuators.

 

Powerful ECU Coding & Online Coding

ECU coding can help mechanics/technicians customize the cars fast to greatly improve work efficiency and meet customer needs.

Make full use of the hidden features: activating the hidden features or disabling the annoying features.

Recode replaced modules: initialize adaptive data for certain components after making module repairs or replacements.

Modify customer’s car: help mechanics/technicians modify the cars, choose the correct car mods, and apply them in the right order to maximize customer satisfaction.

Note: ECU Coding is difference from ECU Programming. TOPDON Phoenix Plus supports ECU Coding on some vehicles, but NOT universally compatible with all vehicles. Please check compatibility before purchase.

 

Bi-Directional Control (Active Test)

Through the active test/bi-directional control, this TOPDON diagnostic tool can accurately figure out whether a specific system, component, or a subsystem in vehicles goes well and pinpoint the location of the problem by interactively operating and testing the vehicle’s related actuators.

Here are some common examples of Active test:

Turn the fuel pump on and off;

Cycle the a/c clutch on and off;

Perform an evaporative emissions leak test;

Switch the SRS light on and off;

Full OBD2 Functions for Emission Issues

Read Codes: Identify which section of the emission control system has malfunctioned.

Erase Codes: Erase the retrieved DTCs and other related data after certain maintenance or repairs to turn off Check Engine Light.

I/M Readiness: Check if car’s emission-related systems are ready for the inspection and maintenance testing.

Live Data: Display live or real time PID data of vehicle’s computer modules to analyze or monitor the components running status.

Freeze Frame: Allow users to view the vehicle’s operating parameters when a fault code detected to quickly locate the malfunctions.

O2 Sensor Test: Check the Oxygen content in the exhaust and makes adjustment for the best air-fuel ratio.

Vehicle Information: Read and display the vehicle information for users, including the VIN, CIDs, and CVNs.

On-Board Monitor Test: Retrieve test results for emission-related powertrain components and systems that are not continuously monitored to determine if the components or the monitors are fine.

EVAP System: Initiate a leak test for the vehicle’s EVAP system.

 

Topology Module Tree Displays Vehicle’s Systems Intuitively & Systematically

The new function Topology System List shows all available systems/modules of the test vehicle in different colors, helping users get to know the scanned systems and the scan results at a glance.

Intuitively display the current module status;

Systematically show the communication structure between the modules;

FCA SGW Access

TOPDON Phoenix Plus supports FCA SGW Access function to securely perform day to day service for cyber enabled vehicles by unlocking vehicle gateways.

Compatible with Chrysler, Alfa Romeo, and Fiat after 2017.

TOPDON Phoenix Plus supports AutoAuth for Fiat Chrysler Automobiles (FCA US) Secure Gateway (SGW) module. Thus, TOPDON Phoenix Plus can unlock vehicle gateways to securely perform day to day service.

Compatible with Chrysler, Dodge, Jeep, Alfa Romeo and Fiat.

Additional Features and Functions:

Auto VIN

Smart AutoVIN & AutoScan: identify car make/model/year automatically and head towards proper diagnostics.

Camera VIN Scan: quickly recognize vehicle barcode with rear camera.

Graphical Display of Data Stream;

TOPDON Phoenix Plus can display data streams in three modes:

1) Value (default): Shows parameters with numbers and lists.

2) Figure: Displays parameters with wave patterns.

3) Combine: The graphs can be merged for easier comparisons.

Diagnostic Feedback

You can send the last 20 test records to us by using “Feedback” feature for timely technical assistance if you encounter any unsolved problems in the diagnostic process.

User-Oriented Design

Multitasking;

VCI Bluetooth wireless diagnosis;

One-touch software update via Wi-Fi;

Instant remote technical support;

Ideal management of workshop operations;

Rubberized outer protection;

Automatic power-off.

 

Wide Vehicle Coverage

Compatible with 130+ Vehicle Brands, 10000+ Vehicle Models Worldwide

Europe: EOBD2, DEMO, ASTONMARTIN, AUDI, BENZ, BMW, CITROEN, FERRARI, FIAT, IVECO, LANDROVER, MASERATI, OPEL, VAUXHALL, PEUGEOT, PORSCHE, RENAULT, ROVER, SAAB, SEAT, SKODA, SMART, SPRINTER, EU FORD, VOLVO, VW, etc.

America: CHRYSLER, BUICK, CADILLAC, CHEVROLET, GM, USA FORD, LINCOLN, etc.

Japan: DAIHATSU, HONDA, ISUZU, MAZDA, MITSUBISHI, NISSAN, INFINITI, GTR, SUBARU, SUZUKI, TOYOTA, LEXUS, SCION, etc.

Korea: DAEWOO, HYUNDAI, KIA, SAMSUNG, SSANGYONG, etc.

Australia: AU FORD, AU HOLDEN, etc.

Brazil: FIAT (Brazil), GM (Brazil), etc.

Russia: GAZ, VAZ, PAZ, SEAZ, IZH, UAZ, etc.

Iran: IKCO, SAIPA, MVM, etc.

India: MAHINDRA, TATA, MARUTI

Malaysia: PERODUA, PROTON

Ukraine: ZAZ

 

Multilingual Support

This car scanner supports 9 languages to avoid the hassle of language barrier during usage

9 Languages: English, French, Spanish, German, Russian, Italian, Portuguese, Japanese, Traditional Chinese

How to Change the Language of Phoenix Plus?

Main Interface → User Info → Settings → Language;

Select the tool language in the Language interface;

After changing the language, download the diagnostic software you need.

Warranty and Update:

1-Year Warranty；

2-Year Free Updating

Specifications

Touchscreen:10 inch

Processor:2.0GHz Quad-Core

RAM:4GB

ROM:64GB

Operating System:Android 10.0

Camera:8.0MP Rear Camera with AF

Audio Output:Built-in Speakers

Battery Capacity:6000mAh/7.6V

Working Voltage:9-18V

Connectivity:Wi-Fi (802.11 b/g/n),Bluetooth 5.0

Input Voltage:DC 5V/2.5A

Working Temperature:0°C ~50°C (32°F ~122°F)

Storage Temperature:-20°C ~ 60°C (-4°F ~ 140°F)

Product Dimension:277.3*190.8*44.5mm (10.92*7.51*1.75 inch)

Weight:1555g (54.85 oz)

Package List:

1*Phoenix Plus

1*VCI Dongle

1*OBDI Adapter BOX Transfer Line

1*OBDII Extension Cable

1*Cigarette Lighter Cable

1*Type-C to USB Cable

1*Battery Clamps/Cable Set

1*Power Adaptor (Include UK, EU, and US plugs)

1*User Manual

1*Password Envelope

10*Non-Standard OBDII Adaptors:

- BENZ-38

- FIAT-3

- NISSAN-14+16

- BMW-20

- CHRYSLER-6

- GM/VAZ-12

- HONDA-3

- MITSUBISHI/HYUNDAI-12+16

- TOYOTA-17

- TOYOTA-22

4*Fuse (φ5*20mm)

2*Fuse (φ6*30mm)