Netgear ProSafe WNAP210 Wireless-N Access Point

Reset to default setting, with upgrade to current firmware (Ver 2.1.6)

Complete with New Power Adaptor & Instruction/Installation Manual & Firmware on CD


Specifications

  • Up to 10x the coverage and 15x the speed of 802.11g networks
  • Backward compatible to 802.11g devices while simultaneously providing faster wireless networking for 802.11n devices
  • Security features include WPA, WPA2, rogue AP detection and 802.1x with RADIUS support
  • Can run on 802.3af PoE for easy placement in optimal locations- desktop, wall-mount or ceiling
  • Internal antennas for optimized antenna configuration without user guesswork
  • Comprehensive SNMP functionality for advanced network management
  • Deploy over large areas with point-to-point and point-to-multipoint bridging over large areas with Wireless Distribution System (WDS)

Standards
  • IEEE 802.11n 2.0 specification, 2.4 GHz
  • IEEE 802.11g, IEEE 802.11b, 2.4 GHz
  • IEEE 802.3af Power over Ethernet (PoE)
Physical Specifications
  • Dimensions: 223.5 x 153.2 x 28 mm (8.79 x 6.03 x 1.10 in)
  • Weight: .41 kg (.90 lb)
Physical Interfaces
  • One (1) 10/100/1000BASE-T Gigabit Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support
  • Power adapter: 12V DC, 1A; plug is localized to country of sale
  • Four (4) LEDs: Power, test, LAN, WLAN
Power
  • Power over Ethernet (PoE consumption: 5.8W)
Security
  • Wi-Fi Protected Access™ (WPA, WPA2)
  • Wired Equivalent Privacy (WEP) 64-bit, 128-bit, and 152-bit encryption for IEEE 802.11b and IEEE 802.11g
  • IEEE 802.1 x RADIUS authentication with EAP TLS, TTLS, PEAP
  • Wireless access control to identify authorized wireless network devices
  • MAC address authentication
  • VPN pass-through support
  • Secure SSH telnet
  • Secure Sockets Layer (SSL) remote management login
  • Ability to configure 8 BSSIDs and 9 VLANs to provide more granular access to the network based upon user type
  • Rogue AP detection
Network Management
  • Remote configuration and management through Web browser, SNMP or telnet with command line interface (CLI)
  • SNMP management supports SNMP MIB I, MIB II, 802.11 MIB and proprietary configuration MIB
Advanced Wireless Features
  • Point-to-multipoint wireless bridge mode
  • Point-to-point wireless bridge mode
  • Repeater mode
  • Wireless Client mode
  • Adjustable transmit power control (TPC) from 100 mW down to 0 mW
  • WMM - Wireless MultiMedia prioritization