E-Bike Conversion Kit 0.35KW 24V Elektrofahrrad Umbausatz Brush Hinterrad Motor
Note: During installation, the two transmission wheels need to be adjusted to a straight line. The deviation of flywheel angle will tilt the flywheel stress point to one side, causing flywheel damage. The flywheel angle is generally adjusted through the mounting bracket of the motor. 
Wichtige Notiz:


Dieser Artikel ist für Fahrräder gedacht, die einen Nabendurchmesser von weniger als 36 mm verwenden.

Dieser Artikel enthält weder Akku noch Ladegerät.

Dies ist unser neuestes Kit für Elektrofahrräder. Dieses Kit montiert das Kettenrad an den Radspeichen, sodass es für die meisten Fahrradräder geeignet ist.

Der Motor verwendet einen Freilauf. Wenn sich das Rad dreht, dreht sich der Motor nicht wie bei einem normalen Fahrrad. Dies kann den Widerstand verringern.

Das Twist-Kit enthält:

1. 1x Bürstenmotor mit Freilauf

2. 1x Kette

3. 1x Kundenspezifisches Kettenrad und Komponenten

4. 1x Motorsteuerung

5. 1x Montageplatte + Schrauben

6. 1x Gas geben (mit Batterieanzeige und Schlüsselschalter)

 
During installation, it is necessary to adjust the angle to ensure that the front and rear wheels are in a straight line. If the angle is not correct, it can be adjusted by adding or removing shims under the mounting plate at the axle position. If the front and rear wheels are not in a straight line, the chain will tilt to one side. This causes the force to tilt to one side all the time when the flywheel rotates, making it easy for the flywheel to be damaged
PushAuction


Am 20.06.2024 hat der Verkäufer die folgenden Angaben hinzugefügt:

DataCaciques