Kenwood TS-130S 3.5-30MHz HF SSB/CW 100W Amateur Ham Radio 

NO RESERVE
FREE SHIPPING

Up for sale used in good working condition Kenwood TS-130S 3.5-30MHz HF SSB/CW 100W Amateur Ham Radio with Microphone .
Comes with antenna adapter and Power Cables with plug . 
1 leg is missing

FROM MANUFACTURER:

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range:10-80 m + WARC in 11 bands
3.5-4.0 MHz
7.0-7.3 MHz
10.1-10.15 MHz
14.0-14.35 MHz
18.068-18.168 MHz
21.0-21.45 MHz
24.89-24.99 MHz
28.0-28.5 MHz
28.5-29.0 MHz
29.0-29.5 MHz
29.5-29.7 MHz
Tuning steps:Analog / continuous
Frequency stability:Within ±1 KHz during the first hour after power on.
Within 100 Hz during any 30 minute period thereafter. /td>
Mode:SSB / CW
Channels / memory management:4 optional
XTAL controlled
Repeater shift / offset:No
Power supply:13.8 VDC
Current drain / power consumption:RX: Max 700 mA
TX: Max 18 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):241*94*293 mm (9.6*3.8*11.7")
Weight:5.6 Kg (12.4 lb)
Other features:IF Shift. VOX. NB.




RECEIVER SECTION
Receiver system:Single conversion superheterodyne
IF: 8.83 MHz
Sensitivity:0.25 uV (10 dB S+N/N)
Selectivity:SSB/CW Wide
2.4 KHz (-6 dB)
4.2 KHz (-60 dB)
SSB Narrow (With optional YK-88SN filter)
1.8 KHz (-6 dB)
3.3 KHz (-60 dB)
CW Narrow (With optional YK-88C filter)
500 Hz (-6 dB)
1.5 KHz (-60 dB)
CW Narrow (With optional YK-88CN filter)
270 Hz (-6 dB)
1.1 KHz (-60 dB)
Image rejection:50 dB
AF output power / speaker:1.5 W at ?% distortion / ? ohm
External speaker connector:3.5 mm, 4-16 ohm




TRANSMITTER SECTION
RF output power:

10 m15-80 m
SSB (PEP):~80 W (160 W input)~100 W (200 W input)
CW (DC):~80 W (140 W input)~100 W (160 W input)
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -40 dB
Microphone impedance / connector:500 ohm to 50 Kohm / 4-pin (Metal locking ring connector