2-Stroke 3.6HP Gas Trolling Motor Water Cooling CDI Ignition Boat Engine HANGKAI
Description
Note:If you have any problems with the quality of the goods you can contact us, we can refund or replace as soon as possible.Please read the return policy below for details.
We will do a good job of after-sales service to ensure that there is no problem with the goods you receive.
 
2 Stroke Heavy Duty Outboard Motor 3.6 HP Boat Engine W/water Cooling CDI System
 
About certification:
 
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding
 
Note: Please install gear oil first before using the motor.Otherwise the motor will be damaged.Please contact us if you need videos.
 
Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
 
Features:
. Features 360 degree steering rotation for reverse without gear shifting
. Start-In-Gear protection/clutch feature prohibits prop rotation while idling
. Lift/Tilt feature for shallow water operation and convenience
. Superior engine water cooling system for improved engine performance
. Easy pull off engine cover with push button latch for instant motor access
. Standard CDI ignition system for easy starting and improved performance
. Vertical mount engine design for increased power, performance and durability
. Superior carbonation system with primer bulb for increased efficiency
. Twist grip throttle handle and engine stop button for improved response
. Superior outboard anti corrosion system and anodes for increased durability
. Durable cast aluminum construction for superior corrosion protection
. Through the prop exhaust outlet for decreased noise and pollutant
. Black propeller or white propeller would be sent in random
 
Specification:
1)Max. Output: 2.6kw /3.6HP
2)Full throttle operating range (rpm): 4000-5000
3)Stroke: 2
4)Cylinder:1
5)Displacement (ml): 55CC
6)Bore×Stroke (mm): 44×33
7)Dimensions (L×W× H) mm: 365×220x920
8)Transom height:43cm/16.92inch 
9)Starting system: Manual
10)Control system: manual tilt
11)Gear shift position: Clutch control
12)Gear ratio:2.08(27:13)
13)Propeller options: 3-7¼ "x 5"
14) Recommended Fuel: # 93 Lead-free gasoline
15)Recommended Gear Oil: Professional Gear Oil
16) Mixed Rating: Fuel :  Oil (25/50:1)  
17) Cold style: Water-cooled
18)Engine Position:Outboard
19)Shipping Weight: 21.4 pounds
20)Short shaft :40cm
21)Stroke: 2-Stroke 
22)Engine(HP): 3.6HP
23)Ignition Systerm: CDI system
24)Cooling Systerm: Water Cooling
 
Hard to start
1.please make sure the ratio of Gasoline: Oil = 35:1.Please DO use special oil for 2-stroke motor.
2.press the button on the carburetor for several times until the yellow and black pipes are full of oil.
3.leave the throttle in the start position before starting,and then keep it in the ON position after running
 
P.S.
About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon 
The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed
It can be marched with inflatable boats, rubber boats or fishing boats
Necessary: you have to prepare a boat-motor stand or Hanging board on your boat
 
Note:
Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.
Don't do the following will avoid cylinder Scoring:
1,start the motor on bank
2, use the motor when it stop coming out of water
Even if you want test the motor, it should be done in the river!
When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.
 
 
 
note
Our machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself.  
note
Our machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself.  
PushAuction