RGB Flag display used in conjunction with Simhub to display race flags or to be used as a gear indicator

Genuine 2mm thick Carbon Fibre Front (Twill Matte Finish)

Stainless Steel Hardware

Brass threaded mount

Light Box Dimensions 80mm x 80mm x 16mm

Easily removable mount with a 1/4" camera thread so you can mount to camera tripod heads or GoPro adaptors, also has holes to mount to aluminium profiles or anything else for that matter, hole spacing is 40mm and will take an M5 or M6 countersunk screw

Unit can be mounted with the USB cable coming out from any side- top bottom left or right

Includes 6ft Braided USB Cable

Setup Video: https://www.youtube.com/watch?v=MdDmqSbTBgc (This is outdated and shows our old model, updated video coming shortly...)

It is very easy to set up you just need to:

install the arduino driver https://learn.sparkfun.com/tutorials/how-to-install-ch340-drivers/all#drivers-if-you-need-them

Install simhub https://www.simhubdash.com/

Setup the leds as you wish within SimHub under the heading "Arduino"> "RGB Matrix"

If you need to rotate the display its under "Arduino">"My Hardware">"RGB Matrix Rotation"