Crank Case Splitter Separator And Crank Puller Installation Tools Off Road Vehicle Auto Supplies With C-clip Adapter
Specification:
【Type】:Crank Housing Separator Crank Remover Installation Tool
【Color】:Back
【Material】:unshakeable
Feature:
【Product size】：The crankcase separator parts are 8mm and 6mm bolts, and the crank puller is M10 x1.25mm and m12x1.25mm adapter.
【High quality materials】：The shell splitter is a heavy steel structure. You don't have to worry about durability. The adjustable arm also allows it to be used in various situations.
【Parts】：This is a combination, including crank puller, crankcase separator and installation tool.
【Unsuitable products】：This product is not suitable for Yamaha Raptor 660、Kawasaki Tecate 250、KTM 125/144/150.
【Adjustable】：360 ° rotatable adjustable arm is suitable for various situations, making installation and disassembly easier.
【High quality materials】：The shell splitter is a heavy steel structure. You don't have to worry about durability. The adjustable arm also allows it to be used in various situations.
【Parts】：This is a combination, including crank puller, crankcase separator and installation tool.
【Unsuitable products】：This product is not suitable for Yamaha Raptor 660、Kawasaki Tecate 250、KTM 125/144/150.
【Adjustable】：360 ° rotatable adjustable arm is suitable for various situations, making installation and disassembly easier.
1.360-Degree Adjustable Arms
2.Druable Performance
3.Mounting Bolts
4.Heavy-duty Steel Construction
Instructions:
STEP 1:
If you gonna set the tool over your crank.loose the bolt up a little bit to fit either flush on you case or as close as possible.
Pick three mounting holes.Use three of the holes that hold the flywheel cover on and space them out as evenly as you can.
Then put the bolt in,which the hole are most accessible.Thread the bolts as far as you can.Put ting the nut,thread the nut down on top of the little ears.With the bolt in,the tools centred over you crank.
Pick three mounting holes.Use three of the holes that hold the flywheel cover on and space them out as evenly as you can.
Then put the bolt in,which the hole are most accessible.Thread the bolts as far as you can.Put ting the nut,thread the nut down on top of the little ears.With the bolt in,the tools centred over you crank.
STEP 2:
No matter what you do you want the ears parallel to the case because you want the bolt on the tool to be pushing on the crank straight,you don’t want it to be pushing crooked or anything.
Make sure all bolts our of your case ,then get ready to split the case.If you missed a bolt,you have s really hard time getting this part ,and will break something.
Putting a 17mm socket or wrench on the tool and tighten it.
Make sure all bolts our of your case ,then get ready to split the case.If you missed a bolt,you have s really hard time getting this part ,and will break something.
Putting a 17mm socket or wrench on the tool and tighten it.
