# NO ELECTRONICS INCLUDED, IMAGE DISPLAYED WAS FOR ILLUSTRATION PURPOSE ONLY!



#BATTERY PACK WILL BE SENT SEPARATELY DUE TO POSTAGE RESTRICTIONS.



# PLEASE NO TIME WASTERS! AGAIN NO ELECTRONICS!


# ***LIPO BATTERY WITH CHARGING BAG***

Worth over £300



HARDLY USED! almost like new, roughly done around 4/5 cycles if that. I have taken some images of each cell showing perfect cell balance and zero defect.



*The battery has a few areas where i was using sticky tape to help hold the battery in securely in my helicopter. This has no impact on the battery purely cosmetic.



INCLUDED WILL BE BOTH CALBES USED TO CHARGE BOTH BATTERIES AT THE SAME TIME PROVIDING YOU HAVE A CHARGER CABLE OF PERFORMING THESE ACTION.


* 1 x Series connector XT90


*All anti-spark XT90-S connectors


*1x Lipo charging bag for that extra safety when charging.


* see images



CHARGER NOT INCLUDED!



Should you have any question please ask.





The 5600mAh 22.2V (x2) 12S 80C LiPo battery is part of Fullymax's Heli range. This new style of LiPos are designed specifically for the rapidly advancing RC helicopter industry and are the number one choice of world-class pilots! These packs are outfitted to perform, with a constant discharge of 80C, and burst discharge of 140C, providing the power and quality needed for a high range of skill levels and demands.



Overlander Fullymax 5600mAh 22.2V (x2) 12S 80C LiPo Battery Specification:


Capacity: 5600mAh


Voltage: 22.2V (6S)


Constant Discharge: 80C


Burst Discharge: 140C


Dimensions (mm): 315 x 46 x 56


Weight (g): 1680








This has been a great machine i must say, however i am selling due to changes. Very good condition as majority of the helicopter is spot free of imperfections.


* The left rocket wing has a hair line crack on the outer side and the under compartment has more noticeable crack. This is still structural repaired by Ca Glue. HAD DIFFICULTY REMOVING THE WING DUE TO STRONG BOND OF LOCTITE HENCE THE DAMAGE!


*These are not required for flight , that said.

Purely for aesthetic.


* The front of the canopy has a small area where the paint has been rube due to traveling in my car, not structural damage here IS purely cosmetic!


Apart from those two bullet points the helicopter is in excellent condition free of damage or scratches. Should the sale warrant shipment. This will be done in its original box and a small extra carton for the boom as the tail is already build.


Note that the item has been strip to what i would say 60% pre-build making easier to transport, with all the information provided above you are able to see exactly when come in the box from the multiple images attached . The are a few extra item thrown in from previous SAB machines that i owned and still compatible with the MAVERICK.


This machine is also still within the warranty period as a bonus!


Should you have any questions please ask.





Introducing the AB GOBLIN MAVERICK SG800: Elevating Your Helicopter Experience to New Heights!


When it comes to helicopter models, the AB GOBLIN MAVERICK SG800 stands in a league of its own. This remarkable machine is designed with you, our cherished customer, at the forefront. It's more than just a helicopter; it's your key to an exhilarating, powerful, and true-to-life flight experience.


A Comparison with Urukay Genesis: Unveiling the Differences that Matter:


Drawing a comparison with the renowned Urukay Genesis, a model engineered to excel in the F3C category, we've created the AB GOBLIN MAVERICK SG800 with some distinct differences that set it apart:


1. Longer Boom for 800mm Blades: The MAVERICK boasts a longer boom that accommodates 800mm blades, providing enhanced stability and lift, ultimately elevating your flight experience.


2. 3-Bladed Tail Rotor: To ensure precise control and authority, the MAVERICK features a 3-bladed tail rotor, a key distinction that enhances your helicopter's performance.


3. Rigid Transmission Module: With a sturdier transmission module and a longer main shaft, the MAVERICK is engineered for robustness and durability, allowing for more rigorous and dynamic flights.


4. Aggressive Graphic Scheme: The MAVERICK showcases a visually striking graphic scheme, making it not only a powerful performer but also a head-turner in the sky.


Experience the Urukay Maverick: Prestigious, Powerful, and Perfect for Realistic Flight:


The Urukay Maverick is more than just a helicopter; it's a testament to our commitment to offering you an exceptional flying experience. It's a model that embodies prestige and excellence, making it perfect for those who seek the thrill of commanding the skies with power and realism. The sound of the 800mm blades slicing through the air is simply breathtaking, adding an auditory dimension to your flying adventures.


Included in the Kit: Side Missiles Simulation


As a special addition to your MAVERICK kit, we've included a side missiles simulation. This detail enhances the overall aesthetics and allows you to customize your helicopter for a unique and engaging flying experience.


Technical Specifications: Unveiling the Power Behind the MAVERICK:


AIRFRAME Weight: 4250g (with blades, no battery, no electronics)


The MAVERICK's airframe is meticulously designed for a balance between structural integrity and agility, ensuring optimal flight control.


Main Blade Length: 2x 800mm


The 800mm main blades provide enhanced lift and stability, making this helicopter suitable for a wide range of flying styles.


Tail Blade Length: 3x 115mm


The 115mm tail blades ensure precise tail control, granting you the confidence to perform intricate maneuvers.


Main Rotor Diameter: 1768mm (with 800mm blades included)


The impressive main rotor diameter showcases the MAVERICK's capability to conquer the skies with authority.


Tail Rotor Diameter: 305mm (with 115mm tail blades included)


The tail rotor diameter complements the main rotor, ensuring precise control and response during your flights.


Cyclic Servos: Standard Size 40mm


The MAVERICK is equipped with standard size 40mm cyclic servos, contributing to its agility and responsiveness in the air.


Tail Servo: Standard Size 40mm


The tail servo, also standard size at 40mm, ensures reliable and precise tail control for your helicopter.


Main Rotor Ratio: 11.8 to 8.4 (21T Included: 10.1:1)


The main rotor ratio is optimized to balance power and control, allowing for smooth and precise flight maneuvers.


Tail Rotor Ratio: 5.0-4.8:1 (26T Included: 4.9:1)


The tail rotor ratio enhances tail control, ensuring stability during your flights.


Typical Motor: 4530 Series


The MAVERICK features a 4530 series motor, known for its power and efficiency, which guarantees an extraordinary flight experience.


Typical Speed Controller: 12S, 160-200 A


With a recommended 12S, 160-200A speed controller, the MAVERICK delivers consistent power and performance, allowing you to push the boundaries of your flights.


Battery Size: 12S 5500mAh


The recommended 12S, 5500mAh battery size strikes the perfect balance between power and flight duration, giving you peace of mind during your flights.


Elevate Your Flying Experience with the AB GOBLIN MAVERICK SG800: Designed with You in Mind!


The AB GOBLIN MAVERICK SG800 is a testament to our commitment to providing you with a helicopter that surpasses your expectations. Every feature has been meticulously designed to ensure your flying adventures are nothing short of exceptional.


With the MAVERICK, you're not just flying; you're embarking on a thrilling journey, where the skies are your playground, and the horizon is your canvas. Join us on this adventure, and experience the power, precision, and prestige of the MAVERICK. It's not just a helicopter; it's a masterpiece of flight engineering, designed with you, the customer, in mind.



TECHNICAL SPECIFICATIONS


AIRFRAME weight: 4250gr (with blades, no battery, no electronics)

Main blade length: 2x 800mm

Tail blade length: 3x 115

Main rotor diameter: 1768 mm (with 800 mm blades included)

Tail rotor diameter: 305 mm (with 115 mm tail blades included)

Cyclic Servos: standard size 40mm

Tail Servo: standard size 40mm.

Main Rotor ratio: 11.8 to 8.4 (21T included: 10.1:1)

Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)

Typical motor: 4530 series

Typical speed controller: 12S, 160-200 A

Battery size: 12S 5500 mAh.