MTH DCS Commander set with Z-500 Power brick, Lock on & wire harness ( for MTH Proto 2.0 & 3.0 Only ) not Lionel brand trains.

 
 
 
ANY QUESTIONS, PLEASE ASK...
Only Fits MTH Realtrax..Not Lionel Fastrack.
will NOT operate Older MTH Horn,  Locosound or Protosound One Versions..or Lionel trains...
WILL ONLY OPERATE MTH PROTO 2.0 & 3.0 EQUIPPED LOCOMOTIVES
This listing is for a MTH DCS Remote Commander Set, a Z-500 Power Brick, a Illuminated Real Trax Lock-on and Real Trax Wire Harness!

Below information from MTH Website & catalog

Features include -

  • Speed adjustment in one-scale-mile-per hour steps
  • Volume Control
  • Front & Rear Proto-Coupler Control
  • Engine Start-up & Shutdown Sounds
  • Activate Passenger Station and Freight Yard Sounds
  • Whistle/Horn Control
  • Bell On/Off
  • Locomotive Direction Control
  • Wireless Communication With DCS Remote Commander Receiver
  • LED Power On Lamp (Receiver Only)

    • The DCS Remote Commander is an inexpensive wireless solution capable of accessing the most popular command control functions programmed into Proto-Sound 2.0 & 3.0 locomotives.* The DCS Remote Commander handheld controller features clearly labeled, one-button control of 9 engine functions. There are no function keys or special codes to remember. Access the locomotive whistle or horn, bell, smoke, direction and speed with just a single button push. You can also access Passenger Station or Freight Yard Proto-Effects, engine startup and shutdown sounds and control the front or rear Proto-Couplers with this lightweight, easy-to-use remote.

    Adding a DCS Remote Commander to your existing layout is simple: just plug your power supply into the DCS Remote Commander receiver and the output wires from the receiver to your track lockon. The DCS Remote Commander can accept any power input (AC or DC) up to 20 volts and 8 amps making it a perfect choice for small and moderately sized layouts.

    * Locomotives will ONLY operate with the DCS Remote Commander if they are set to the factory default settings. If the Factory default settings must be reset, the reset procedure must be done with a DCS Digital Command System (Item No. 50-1001). Using a conventional transformer with bell and whistle buttons to reset to Factory default settings will NOT properly reset the Proto-Sound 2.0 or 3.0 electronics to the correct address needed by the DCS Remote Commander to operate the locomotive.
    THIS WILL NOT OPERATE PROTOSOUND ONE or Locosound...( will NOT operate Lionel )

    Product Details

                       WILL OPERATE MTH PROTOSOUND 2.0 & 3.0 ONLY ( NOT PROTOSOUND ONE or Older model's prior to year 2001...  )
    THIS SYSTEM IS FOR MTH REALTRAX ONLY & MTH Trains only
    NOT LIONEL....

    Product Features

    Features
  • Speed adjustment in one-scale-mile-per hour steps
  • Volume Control
  • Front & Rear Proto-Coupler Control
  • Engine Start-up & Shutdown Sounds
  • Activate Passenger Station and Freight Yard Sounds
  • Whistle/Horn Control
  • Bell On/Off
  • Locomotive Direction Control
  • Wireless Communication With DCS Remote Commander Receiver
  • LED Power On Lamp (Receiver Only)
  • AC or DC Power Input
  • Remote Requires (2) AA Batteries (not included)
  • Unit Measures:6" Long
    • We are also an Authorized MTH Retailer ,E-Z Catch Train shop, 5 tysen street, staten island, new york 10301, Family owned since 1958.................................... ANY QUESTIONS, PLEASE ASK BEFORE BUYING..