You are only buying One shrink tube that shows on first picture*

UP TO SALE IS FOR NEW STOCK X-HEAT SHRINK TUBE SIZE 45MM/1.77" X 1600MM (1.6M)/64" IN BLUE COLOR THIS SHRINK TUBE IS AS SAME AS YOU HAVE SEEN ON SHIMANO OR DAIWA ROD AND SO MANY CUSTOM RODS.

*USEFUL NOTE FOR ALL: 1"= 2.54CM = 25.4mm.

IT CAN BE USED FOR BUILDING RODS OR REPAIR ROD HANDLES. JUST CUT THE SLIGHTLY LONGER IN LENGTH THAT YOU REALLY NEEDED AND SLIP OVER FROM ROD BUTT TO HANDLE AND HEAT WITH INDUSTRIAL HEAT GUN OR TORCH or just do the easy way is to place the rod handle that covering with shrink tube 3-4” high on top of stove heat. You just want to utilize the heat to shrink down the tube. As you heat the rod roll it around kind of like a glass blower would do to heat all sides evenly. Be careful not to over heat and burn the rubber and other parts of rod. It only takes about 20 seconds or less to shrink down the tube. Do it at shorts times. I than took a cool wet towel and pressed the rubber snug onto the rod. Remember to line up and center the diamond pattern.

IT CAN BE SHRUNK TO HALF OF ORIGINAL SIZE ON WIDTH.

IF YOU HAVE QUESTION ABOUT THIS X - SHRINK TUBE PLEASE CONTACT ME AT MY EMAIL.

 

PLEASE VISIT MY STORE TO SEE OTHER SIZES AND COLOR HEAT SHRINK TUBE.