Description
* 7-inch TFT LCD screen mirror
* 7 IR LED Night vision car rear view camera
* Easy installation for DIY usage
* 2.4G wireless video transmission
* Real-time rear view while back up
Reverse Camera
*Car Rearview /Reverse /Backup camera
*High Definition and Wide Viewing Angles
*Waterproof and Night vision
* Pickup device : 1/3" CMOS sensor
* System: PAL/NTSC
* Validity pixel: PAL: 628*586 NTSC: 656*492
* Sensor area: 4.08mm*3.12mm
* Horizontal definition: 420 TV Line
*Shutter speed: 1/60-1/20000
* Minimum illumination: 01-0.5LUX/F=1.2 (0 Lux with IR on)
* Voltage: DC-12V ;
*Video Output : RCA Connector,1.0vP>P,75Q
*Consumption : Max 300mA with IR on
*Operating Temp:-20°C~75°CRH 95% max
*Lens Angle:135 degree
*Weight:60g (Camera only)
Monitor
Car reversing backsight surveillance
Blue screen when no video signal
Screen Dimensions: 7.0 inch
Screen Format: 16:9
Resolution: 480(W)XRGBX234(H)336960Pixels
System: PAL/NTSC
Power: DC 12V
Consumption: 6W
Video: Tow Way Video Input
Rear Watching: Image can be changed left and right
Operate Mode: The Key operation and remote control
Size: Approx 247*105*25mm
Weight: 751g (with packing)
POWER: Switch for power supply
VIDEO: V1/V2 selecting
MENU: Menu (brightness, colors, contrast) button
MODE: Selecting results of display
*Take one minute get your camera become a wireless camera
*Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation)
*Work Range:Up to about 50m(Hollowness)
*Connects to rear-view camera and front video screen
*Fit all RCA composite video connections
*Power: DC 12V
*Transmitter/Receiver Cable Length:1.5m
The monitor will automatically wake up when your car
reversing,then you can see the video from the camera ,and automatically turn off
when you complete reversing,then the monitor looks like a dark mirror ,a bit
darker than the normal mirror,it can Anti-vertigo and protected your eye
to let the mirror monitor working as above,you need to connect the monitor's
blue cable with the car reversing control wire 12v positive,and connect the
reciever video output to monitor v2 input,
here is how to connect the cable ,please follow it to installed it yourself
monitor cable
red to car 12v+,black to car GND,blue/green to car reversing control wire
12v+(withyour gearbox reversing switch)
receiver cable
Red to monitor Blue/Green cable,
black to car GND
video to monitor V2 input
transmitter cable
red to reversing light 12v+
black to Car GND
DC plug to camera power input
video plug to camera video output
all if ok now,and the monitor will automatically turn on /off depends on your
vehicle reversing switch
see the cable connection diagram on my item page yourself
Package Content:
1 x 7 IR LEDCarReversing Camera
1 x 7 inch TFT LCD Screen Mirror Monitor
1 x wireless Transmitter & Receiver Kit
1 x Remote
2 x mini Screw
FAQ:?
Q:the item is wireless camera,Why there is so much cable/ wired need to conenct for it?
A:The wireless car rear view camera is meaning that there is no need to connect any video cable from camera to monitor,
All of the cable is for camera and monitor or the reciever tranmitter,
You didn't need to link the video cable around your car if you use the wireless reversing camera kit
Q:Does it work with my car/ horse trailer/carvan/motorhome?
A:Please check the volt of your vehicle electronics system,
If it is 12v,This item will work fine,
If it is 24v,This item will not work and the camera will be damage!
Q:Can I install the camera kit for long time view to track the Traffic behind my vehicle when driving?
A:Sorry that if you installed it for long time rear view,This camera should be die out soon,
if you want the long time rear view,Please buy the "18 led reversing camera" in my shop,the 18 led camera is best for long time rear view!
Q:Does the image of the camera is mirror image?
A:the image ofall the reversing camera is mirror image!
Q:Does the monitor showing with grid-line on it??
A:the camera build with grid-line function on it,If you connect the camera to any monitor,you can see the grid line on the display
Q: What is the monitor's blue cable connect for?
A:It is connect for your reversing system switch positive,Please do not connect it with the car 12v+ directly or connect it with the red wire of the monitor,Or you can't turn the monitor off and can't switch the V1/V2 button to select the video input from one to the other
Q:The monitor shown the blue screen and said "no singal"?
A:Please click the V1/V2 to select the correct video input for the monitor
Q:Still "no signal",I can switch the monitor power on/off or switch the V1/V2 but
A:please do not mixup which one is the receiver which one is the transmitter
The receiver is connect with the monitor,the led light on it is red color
the transmitter is connect with the camer,the led light on it is blue color
Somebody mixup with them and not work,
Q:The monitor build with 2ch video input,can I connect two wireless camera for this monitor?
A:Sorry that it will no work,All of the reciever and transmitter is in same frequency,If you used two wireless camera for the same vehicle,They will interference the video signal each other and the receiver can't get the correct signal from transmitter,So it will not work
If you want to add the second camera for this wireless camera kit,Please choose the wired camera and link by video cable form the monitor to camera
