10 lot Cat6 UTP Network Lan Ethernet Cable  100% copper  




10 lot of Cables Length:  1/2FT 1FT 2FT 3FT 4FT 5FT 6FT 7FT 10FT 15FT 20FT 25FT Feet

 

 

Brand New – Factory Sealed  -  Lowest price


* Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other Computer Networking applications.
* Certification: TIA/EIA
* T-568B standard wiring


* U Twist Pair
* CM Type PVC Jacket 
* 24AWG 4pair Stranded Copper Wire
* 50 Micron Gold Plated  RJ45 Plug
* RoHS compliant



FAQ
TIA/EIA


TIA/EIA is abbreviation of Telecommunication Industry Association and Electronics Industry Alliance that sets telecommunication standards in the US. Our patch cable complies with the latest TIA/EIA telecommunication cable standards.
T-568B Wiring


There are two standards for wiring color code, 568A and 568B. While there's no difference in connectivity between 568A and 568B, 568B is the most prevalent wiring color code in the US. Our patch cable is 568B wired.
UTP and SSTP 



UTP is Unshielded Twisted Pair and SSTP is double shielded (each pair foil shielded then 4 pair braid shielded). Both have the same Ethernet comunication performance, but SSTP has better protection against Electro-Magnetic noise from outside. UTP is accepted for residential and general commercial installation.
CM rated jacket


CM for communication. It is set by UL (Underwriters labolatory) to indicate the wire jacket material safety. CM rating is safe to use in residential and general commercial installtions.
24AWG and Stranded



AWG (American Wire Gauge) indicates wire thickness. Higher the number, thinner the wire. 24AWG or 26AWG is commonly used for ethernet cables. Stranded wire is a bundle of thin wires as oposed to solid wire that is single solid wire. Stranded wire is more flexible than solid wire and commonly used for indoor network wiring such as patch cable.
RoHS


Restriction of Hazardous Substances Directive. This directive restricts the use of hazardous materials such as lead or mercury in the manufacture of electronic and electrical equipments. BestLink Netware cables are all RoHS compliant.



Our patch cable 100% Copper, wtih 50 micron gold plated RJ45 plug, and contact pin of our RJ45 jack is 50 micron gold plated.


Our patch cables are made of 100% pure copper wire.

WE DO NOT USE CCA (Copper Clad Aluminum)


CCA wire uses an aluminum conductor that is coated with copper and it is less expensive than pure copper. The use of CCA wire in twisted pair network cable is not permitted by the IEC or CENELEC in their cable standards, and 3P; an organization that provides third party testing for compliance with industry standards for cable manufacturers strongly advises against the use of CCA wire in twisted pair network cable. The use of CCA wire directly contravenes both CAT5e and CAT6 specifications which denote the use of copper conductors.

CCA has higher attenuation properties than pure copper cable, this will result in more packets of data having to be retransmitted when it is corrupted or lost at the physical layer. This effect is particularly prevalent on longer cable channels on or near the 100meter maximum and will at best lead to a slower network for most users of CCA twisted pair cable.

In addition to less desirable electrical qualities CCA wire presents a number of physical problems for installers ultimately leading to delay and additional expense. CCA wire has a lower tensile strength than pure copper and as such the cable can be damaged through pulling, with conductors or the whole cable breaking. CCA wire in twisted pair applications also has less tolerance for bend radius.