Pipercross Induction Air Filter Kit - PK370 And Instructions To Fit Quick Overview - More Power - *13.5bhp / 14ft lb torque - Sports Sound - Increased Air Flow (45% less restrictive) - Washable Reusable - Maximum Bhp Torque - Replace The Factory Airbox - Heat Shield Included Whats included inside this kit - High flow Stage 2 turbo to MAF pipe x1 - Intake Pipe joiner 1 x1 - MAF to filter silicone hose x1 - Filter support bracket x1 - 1st Heat shield support bracket and hardware x1 - Pipercross Performance Foam Air filter x1 - 2nd Heatshield support bracket and hardware x1 - Specific Heatshield x1 - 90>110 Hose clip x1 - 80>100 Hose clip x3 - M6 x 20 hex bolt x2 - M6 Washer x4 - M6 Nylock nut x2 Description Pipercross Intake Kit PK370 After some extensive ...
Pipercross Induction Air Filter Kit - PK370 And Instructions To Fit

Quick Overview
Whats included inside this kit

Description
Pipercross Intake Kit PK370

After some extensive development on our Mk6 Golf GTI Pipercross are now pleased to release our new intake kit. Incorporating a full custom made, light weight aluminium heat shield, large open cone filter with full radius spinning, custom Samco Hose and full stage 2 back pipe to turbo.

We used our flow bench to test the system throughout the development stage comparing it to the OE unit, we managed to create a system that was up to 45% less restrictive than the OE unit.

First run on a standard car with OE airbox gave a reading of 230bhp, with our kit on we got 232.9 bhp. When then put a stage 1 map on the car as this is where we would see the real gains and as expected we did. OE airbox with map made 250bhp with 292 lb/ft torque, with the Pipercross kit installed we made 263.5bhp and 306.6 lb/ft torque a 13.5bhp gain and 14lb/ft increase!!!

About Pipercross Induction Kits

Each Pipercross Induction kit is an air intake system designed specifically for your car. Research, development and testing is carried out on every kit to ensure that the product we make performs well, looks fantastic and is easy to fit.

The 150mm outer diameter base we use for Induction kits and Viper intakes create laminar air flow to keep air turbulence to a minimum. Turbulence causes drag which slows the airflow down and limits the flow rate of any induction system. Air filter units without a full radius edge create turbulence, thus reducing their effectiveness.

At the heart of the Pipercross air filter is a specially developed polyurethane foam which acts as the filtration medium, having both higher performance and life expectancy than paper. Pipercross reticulated foam is created by a chemical reaction - it's placed in a gas filled combustion chamber where a controlled explosion burns away any complete cell walls in the material to form a strictly quality controlled skeletal cellular structure

This process, ensures that the foam consists of tiny open cells which trap contaminants to protect your engine against even the harshest of environments without compromising air flow.

Main Benefits

About Pipercross
Pipercross has been making high performance air filters for the motor sport and domestic markets for over 25 years. Based in Northampton, England, Pipercross is situated in the country along with some of the biggest names in motorsport engine design and manufacture in the world.