Green Reflective Window Film 

This is a solar control green mirror window film that can help reduce heat and glare by upto 80%. It will also give you excellent daytime privacy. Once applied to the glass it will give a mirror green finish to the outside and give vision out. This film is suitable for all types of flat glass windows. It can be used in the home or office it is the highest quality professional window film. 



Please note: because the film works by reflecting light then this means it may have the reverse effect at night times. The film is not recommended if you are trying to achieve privacy between internal rooms 



Once fitted is totally resistant to moisture and condensation. It is also very durable and easy to clean. 


Easily fitted by using soapy water Easy to cut & trim to size Reduces Solar Heat Gives excellent one way vision during the day Reduces 98% of UV light, the main cause of fading

Visible Light Transmission – 15%

Glare Reduction – 83%

Heat Rejection – 78%

UV Rejection 99%


Green Window film, is ideal for external facing windows, internal partitions, glass staircases, offices, bathrooms, shower screens etc. 



* Full fitting instructions supplied with your order.


* Professional quality - as used by professional window film fitting companies. 


* Non Fade, Easy DIY install, Self Adhesive Film, Easy to cut & trim to size 


* Allows natural light through the film 



FITTING INSTRUCTIONS 



Tools: - knife - Spray bottle containing water with a few drops of washing up liquid (Slip Solution)



Squeegee Method: 



1)    Thoroughly clean the window the film will be applied to.

2)     Cut your film to size of the window, adding an extra 2cm to the width and height.

3)    
Remove the clear lining film from back of the window film and spray the adhesive back of the film, as well as your fingers, with the Slip Solution. Attach a piece of sticky tape to either side of the film at one corner and peel them apart.


4)    Spray the glass with the Slip Solution. 


5)    Apply the adhesive side of the film onto the glass and slide into position.

6)    Spray the face of the film with the Slip Solution and using a squeegee, push out all the soapy water from behind the film 


7) Trim off any excess film using the knife