Professional quality Tint Film

This is Active Film® Film, Out of this world looks and performance with great heat control. So grab yourself a bargain.

Quality tint film, cut off the roll, available in the following widths:-

51cm

76cm

100cm

152cm

In the following lengths:-

1 Metre to 30 Metres

Available in the following shades:-

5% our darkest AKA Limo Black Tint

Specification:

1ply - Non Metalized

U.V transmission - 1%
Visible light transmission - 6%
Solar energy rejected - 40%
Solar reflection - 7%
Solar absorption - 48%
Solar transmission - 45%
Glare reduction - 94%

Warranty - 3 year. Scratch resistant coating.

20% Second from darkest AKA Medium Black Tint Specification:

1ply - Non Metalized

U.V transmission - 1%
Visible light transmission - 21%
Solar energy rejected - 39%
Solar reflection - 6%
Solar absorption - 46%
Solar transmission - 48%
Glare reduction - 75%

Warranty - 3 year. Scratch resistant coating.

35% Third from darkest AKA Light Black Tint Specification:

1ply - Non Metalized  

U.V transmission - 1%
Visible light transmission - 39%
Solar energy rejected - 34%
Solar reflection - 6%
Solar absorption - 39%
Solar transmission - 55%
Glare reduction - 56%

Warranty – 3  year. Scratch resistant coating.

50% Forth from darkest AKA Ultra Light Tint Specification:

1ply - Non Metalized  

U.V transmission - 1%
Visible light transmission - 52%
Solar energy rejected - 29%
Solar reflection - 6%
Solar absorption - 31%
Solar transmission - 63%
Glare reduction - 42%

Warranty – 3  year. Scratch resistant coating.

* Full fitting instructions supplied with your order.
* Professional quality - as used by professional window film fitting companies.
* Non Fade, Easy DIY install, Self Adhesive Film, Easy to cut & trim to size
* Allows natural light through the film

Tools: - knife - Spray bottle containing water with a few drops of washing up liquid (Slip Solution)

Squeegee Method:

1) Thoroughly clean the window the film will be applied to.
2) Cut your film to size of the window, adding an extra 2cm to the width and height.
3) Remove the clear lining film from back of the window film and spray the adhesive back of the film, as well as your fingers, with the Slip Solution. Attach a piece of sticky tape to either side of the film at one corner and peel them apart.
4) Spray the glass with the Slip Solution.
5) Apply the adhesive side of the film onto the glass and slide into position.
6) Spray the face of the film with the Slip Solution and using a squeegee, push out all the soapy water from behind the film
7) Trim off any excess film using the knife

The UK law:-

The law in the UK states that you have to allow a minimum of 70% of light through the front driver and passenger side windows meaning that you can legally install the 70% tint on these windows unless the glass is already tinted.

You must not use any of the darker tints unless the vehicle is specifically for off road use such as show cars. The rear windows can be as dark as you want as there is no law about these windows.