PRODUCT DESCRIPTION:
AA-CONDUCTIVE GRAPHITE is a naturally occurring form of graphite that is typically found as discrete flakes ranging in size from 50-800 micrometers in
diameter and 1-150 micrometers thick. This form of graphite has a high degree of crystallinity, which equates to near theoretical true density, high thermal
and electric conductivity, and excellent molding characteristics.
AA-CONDUCTIVE GRAPHITE is used in many applications including but not limited to powder metallurgy, fuel cell bi-polar plates, coatings, thermal
materials, friction moderators, electrically conductive materials, refractories, general lubricant applications, pencils, gaskets, rubber compounds, and other
advanced polymer systems. Commercial grades are available in purities ranging from 80-99.9% carbon, and sizes from 2-800 microns.
AA-GRAPHITE GRAPHITE is made nearly totally of carbon atoms, and as with diamond, is a semimetal native component mineral, and an allotrope of carbon.
AA-GRAPHITE GRAPHITE is the most stable form of carbon under standard conditions. For this reason, it is used in thermochemistry as the standard state for
defining the heat of formation of carbon compounds. AA-GRAPHITE GRAPHITE may be considered the highest grade of coal, just above anthracite and
alternatively called meta-anthracite, although it is not normally used as fuel because it is difficult to ignite.
PRODUCT INFORMATION:
% CARBON (LOI) | 96 Min - 100 Max |
% MOISTURE | 0.5 Max |
% - 325 MESH (44 Micron) | 99.5 Min - 100 Max |
MT %50 (Microns) | 9 Min 14 Max |
TYPICAL ANALYSIS:
% CARBON (LOI) | 96.8 |
% MOISTURE | 0.34 |
% - 325 MESH (44 Micron) | 99.87 |
MT %50 (Microns) | 10.2 |
TEST METHODS:
CARB | E4-1 |
MOIST | E4-7 |
MT | E3-5B |
SA | E3-6 |
SC | E2-3 |
GENERAL INFORMATION:
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
AVAILABILITY:
This epoxy can be supplied in many different packages