|
Dear customer,
When there might be a difference between the automatic generated specifications by the Ebay system, and the hand written/typed description, then please be aware that the only correct description is what's written by our selves here in the description.
Specifications above might be slightly different.
Thanks for your understanding.
Interface: NETWORK RJ-45
Model: Epson TM-H6000III (Type 3)
P/N: M147G
INcluding: Power supply
Tested and working OK!
General
Receipt: Thermal line printing
Slip: 9pin serial impact dot matrix
Endorsement Printer: 8pin shuttle impact dot matrix
Print Font
Receipt: 9x17 / 12x24
Slip: 5x9 / 7x9
Endorsement Printer: 5x7
Column Capacity
Receipt: 56 /42 columns
Slip: 60/ 45 columns
Endorsement Printer: 40 columns
Character Size
Receipt:
0.99mm W x 2.4mm H (0.039" W x 0.095" H)
1.41mm W x 3.39mm H (0.056" W x 0.134" H)
Slip:
1.56mm W x 3.1mm H (0.061" W x 0.122" H)
1.24mm W x 3.1mm H (0.049" W x 0.122" H)
Endorsement Printer:
1.1mm W x 2.42mm H (0.043" W x 0.099" H)
Character Set
95 alphanumeric, 37 international, 128x8 graphic, Japanese or Taiwanese Kanji (factory option)
Printer
Print Speed
Receipt:
200mm/sec (63lps, 3.18mm {1/8"} conversion)
Two-color mode: 78mm/sec (24.5lps, 3.18mm {1/8"} conversion)
Slip: Approx 5.7lps (40 columns, 17.8cpi)
Endorsement Printer: Approx 1.9lps
Data Buffer
45 bytes or 4KB (up to 384 KB for graphic files)
Paper Dimensions
Receipt: 79.5 + 0.5 x diameter 83.0mm (3.13 + 0.02 x diameter 3.27")
Slip: 70 to 148 x 150 to 210mm (W x L) (2.76 to 5.82 x 5.91 to 8.27")
Paper Thickness
Receipt: 0.06mm to 0.09mm (0.0024" to 0.0035")
Slip: 0.09mm to 0.31mm (0.0035" to 0.012")
Endorsement Printer: 0.09mm to 0.2mm (0.0035 to 0.0079")
Comes as shown on picture, if something is not on the picture it's not included unless stated otherwise. |
