Panhard Bar Re-Buildable Rock Joint 1-1/4"-12 x 5/8"Bore
NEW!!! Forged 4130 Chromoly Re-Buildable Rock Joint / Flex Joint ( 2.625” wide ball center with a 5/8” thru bolt hole ) with Built-in High Misalignment Spacers and Polyurethane Bushings to Help to Dampen Road Noise and Vibrations. These units are externally greasable via a zerk fitting. Finished in a Silver zinc plating.
With these Re-buildable Heim Joints you can Stop buying and replacing expensive worn out heim joints. Comes Fully Assembled.
Note: Before use Grease joints with a quality silicone-based lubricant with PTFE
Polyurethane bushings should be greased with a silicone-based lubricant with PTFE.
Even though polyurethane is resistant to oil and other solvents, you never want to use petroleum-based or Lithium grease when servicing these bushings.
Lithium grease can dry out polyurethane causing cracks and premature failure and some of the additives in Petroleum based greases can have a chemical reaction and break down the urethane causing premature failure.
Here are some silicone based options:
(Energy Suspension’s Formula 5) Is a good lubricant but is usually only available in a tub or small squeeze tube (so you would probably want to manually pack a grease gun over packing each joint by hand)
(Super Lube 92150) comes in a 14.1oz cartridge and it’s a pretty good lubricant. (and it is grease is gun capable)
CONTENTS
ROD END SPECS:
TUBE ADAPTER SIZES: