The Maxi Is A Dusk To Dawn Nightlight With A Rechargeable Base & Power Failure Light Functionality.

The torch has a bright 80 lumen output or a lower 60 lumen output dependent on the setting you choose, as well as an emergency flashing light meaning you will always have sufficient light whenever you need it. You can also use the front-facing nightlight LEDs as a bright hands-free task light.

Please note this torch does have a power failure light functionality but it is also a night light, the automatic night light can be switched to 'off' to use the MAXI as a power failure night only.

Product Features:

• Rechargeable Via Induction Charging Base
• The Torch Automatically Turns On When There's A Power Cut If The Torch Is Plugged In & Switched On At The Mains
• Cool To Touch LEDs Lights
• Lightweight Torch
• Slide The Torch Out Of The Base To Use As A Torch
• Slide The Switch From Off - On - Auto Hi - Auto Lo To Move Between Settings Whilst The Torch Is In The Base - These Choose The Level Of Light That The Torch Will Emit When It's Being Used As A Nightlight
• On - The Nightlight Stays On When In The Cradle
• Off - The Nightlight Will Not Come On
• Auto Hi - The Nightlight Will Come On With A 80 Lumen Light
• Auto Lo - The Nightlight Will Come On With A 60 Lumen Light
• The Torch Has A Top Light & A Front/Side Light
• Once The Torch Is Out Of The Cradle Press The Button To Switch Between Hi Light, Lo Light, Flasher & Off
• Charge Lasts Up To 15 Hours When The Torch Is On The Lo Light & 3 hours On Hi Light
• The Side Light/Front Light Last 5 Hours On A Full Charge
• 40 Metre Light Spread
• In Order To Use The Torch As A Power Failure Light It Must Be Plugged In & Switched On At The Wall With The Slide Switch Turned To Off
• Long-Lasting LEDs Are Efficient & Cost-Effect

• The MAXI Can Be Used As A Nightlight That Will Automatically Turn On When Darkness Is Detected
• The Torch Must Be Sat In The Cradle, Switched On & Plugged In To Be Used As A Nightlight & Power Failure Light
• Remove The Torch To Use As Task Light Or Classic Torch
• Remove The Torch & Switch To A Hi Light Or Lo Light To Find Fuse Boxes/Doors/Stairs Etc In A Power Cut, Choose The Flasher Mode For Emergencies