X10 PHASE COUPLER / SIGNAL BRIDGE

Are you having trouble controlling some of your  X10 devices from a particular location, but can control it from other locations?

Are some X10 devices intermittent?

More than likely, the problem modules and your controller are on opposite phases of your house wiring and need to be electrically coupled.

TRY THIS SIMPLE TEST: Turn on any 220 volt appliance (dryer, range, air conditioner) NOTE: If you don't have active 220 volt appliances to test, move the module or the controller so they are both plugged into the same circuit (on the same breaker or fuse). If the module(s) now consistently respond to commands, THIS PHASE COUPLER SHOULD FIX THE PROBLEM

Most houses are fed from a 220 volt service which is then split into two phases of 110 volts each in the circuit breaker box (see fig. 1 above). The X10 signals, which are transmitted onto the house wiring on one phase, will normally travel across to the other phase through the breaker panel, pole transformer, etc. If however, the data transmission is not making it from one phase of house wiring to the other, you may couple the signal between them by installing this phase coupler across the two phases in the panel, i.e. by connecting the coupler across your 220V air conditioner breaker or any 220V 30 Amp Max. breaker. Breakers feeding heat producing appliances such as water heater, range, dryer or devices that draw high current on startup should not be used. The excessive heat that builds up at the breaker terminals from these devices will eventually cause heat failure of the coupler. Alternatively, you can install the coupler between two adjacent 120V breakers if they are on different phases (see fig. 2 above).

MODULE SPECIFICATIONS:

• PROVIDES OPTIMUM COUPLING OF X10 SIGNALS
• RATED FOR UP TO 630 VDC (250 VAC) SERVICE MORE THAN ENOUGH CAPACITY TO SAFELY HANDLE 220 VAC  
• EASY INSTALLATION

I'VE USED THIS METHOD OF SOLVING X10 MODULE PROBLEMS SUCCESSFULLY FOR OVER 30 YEARS

INSTALLATION IS SIMPLE (BE SURE TO SAFELY SHUT POWER TO THE WORK OFF)

IF YOU'RE UNCERTAIN HOW TO INSTALL THESE, CONSULT A KNOWLEDGEABLE FRIEND OR QUALIFIED ELECTRICIAN.

If you’re using an X10 wireless remote or motion sensor, you may be out of range of the transceiver. In these cases, an SR751 RF SIGNAL REPEATER, available in my Ebay store, may help.

Also read the description for our X10 PLC01 POWERLINE CARRIER REPEATER which may repeat and boost X10 line signals enough to overcome some phase and line noise issues.

• SHIPPING TO US BUYERS ONLY $3.00

PLEASE ASK ANY QUESTIONS BEFORE BUYING

READ WHAT THESE BUYERS HAD TO SAY ABOUT THIS ITEM:

Your couplers are such a fantastic bargain I think everyone should try one before putting out big cash for the commercial coupler and repeater boxes. You're doing a great service to the X-10 community!

Fantastic! Absolutely the FASTEST shipping ever!!! Unbelievable! :-)

FAST DELIVERY ; GOOD PRODUCT; AN EXCELLENT EBAYER

Everything as advertised and if an opportunity arises will bid again

Got it quick, looks great! Thanks.

excellent ebayer -great communication-fast shipping-helpful -A+++

Very helpful, courteous, and professional. Thank You!

Item exactly as described. Easy transaction. A+++ seller

Item as described and shipped very quickly. Thanks!

Recieved installed and works, Thanks excellent Ebayer

Great Fix for X10 problems Thanks! Fast Shipping AAA+++ eBay Seller!!

Thanks, Worked Well!!!

Good service. Wish I had known there was such an item before. 

CLICK HERE TO SEE MORE X10 DEVICES

DON'T SEE WHAT YOU WANT? NEED LARGER QUANTITIES? Contact me with your zip code and email address with your requirements

 WHENEVER POSSIBLE, I COMBINE ACTUAL WEIGHT ON MULTIPLE ITEM PURCHASES AND CHARGE ACTUAL SHIPPING & HANDLING CHARGES

THANK YOU FOR LOOKING AND GOOD LUCK !!

 Check out my other items!

Be sure to add me to your favorites list!

Sign up for my email newsletters by adding my eBay Store to your Favorites

Visit My eBay Store: Big John's Place

Installation on breakers controlling high heat devices such as water heaters, ranges, dryers ordevices that draw high current on startup should not be used. These breakers typically build up heat at their terminals which could transfer to the coupler, causing heat failure. An air conditioner breaker is the ideal location.

NOTE TO INTERNATIONAL BUYERS: UNLESS OTHERWISE SPECIFIED, THE X10 PRODUCTS ON THE EBAY U.S. SITE USE 120V 60HZ POWER. WIRELESS DEVICES OPERATE ON THE U.S. FREQUENCY OF 310MHZ PRICE AND SHIPPING DOES NOT INCLUDE ANY CUSTOMS FEES, DUTIES OR TAXES WHICH ARE THE RESPONSIBILITY OF THE BUYER

Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.