Advanced fault diagnostics for Fiat & Alfa Romeo cars

Our MultiECUScan bundle package supports fault code reading (and clearing) and live sensor data from controllers such as Engine, Automatic Transmission, Airbag, ABS and Electric Power Steering.

Finally you can look after Fiat-based cars at home or in the workshop without needing to visit the dealer!

Coverage includes 1999 to 2017** petrol and diesel models (cars must have a 16-pin diagnostic socket fitted to be compatible with this package).

** Important - 2018+ model year coverage: **
Please note - some vehicles from the 2018 model year onwards (sold since mid-2017) , will have a "Security GateWay" Module (SGW). The SGW module limits diagnostic communication to read-only access, unless the tool can obtain a session-specific access code from Fiat group's servers (which requires an expensive subscription).

This limitation blocks tools from executing commands on the vehicle (e.g. actuations, procedures and even clearing of DTCs).
However, the current generation of SGW can be bypassed, by unplugging the SGW from the car, and connecting an SGW Bypass Adaptor (available separately) in its place.
Vehicles known to be affected so far include MY2018 500X/Renegade, 500L MCA, Doblo, Giulia/Stelvio..

Please see www.multiecuscan.net/SupportedVehiclesList.aspx for MultiECUScan's full car coverage list.....

    What features are available?

    • Fault code reading and clearing 
    • Live sensor reading display (numerical or graph format)
    • Data Recording
    • Actuator testing on supported modules
    • Reset/Programming functions on supported modules
    • Service Reminder Indicator reset on supported vehicles

    What is included in the package?

    • The latest version of the MultiECUScan software supplied on CD
    • MultiECUScan software license for full registered version (we are an authorised reseller - see the MultiECUScan website)
    • Genuine Vgate vLinker FS USB Diagnostic Interface (faster than ELM327)
    • KKL USB Diagnostic Interface
    • Green adaptor lead to allow ABS and Power Steering diagnostics
      (Referenced by MultiECUScan as 'Adapter 1')
    • Red adaptor lead to allow Airbag diagnostics
      (Referenced by MultiECUScan as 'Adapter 2')
    • Yellow adaptor lead for low-speed CAN connection
      (Referenced by MultiECUScan as 'Adapter 3')
    • Purple adaptor lead to allow electric hood diagnostics
      (Referenced by MultiECUScan as 'Adapter 4')
    • Blue adaptor lead for MS-CAN / BHCAN connection
      (Referenced by MultiECUScan as 'Adapter 5')
    • Grey adaptor lead for high-speed CAN connection
      (Referenced by MultiECUScan as 'Adapter 6')
    • Quickstart setup guide
    • Access to online support forums on MultiECUScan.net

    What do I need to use the package?

    • A laptop or PC running Windows 10 or 11 with a USB port
      (Windows 7 or 8.1 may still work, but are no longer supported by Microsoft and so we cannot offer support on them if we suspect the O/S to be the cause of any problems)
    • Microsoft .NET Framework Version 2.0 SP1 or newer. (Free to download from www.microsoft.com if not already installed).
      For Windows 8.1 & 10, Microsoft .NET Framework 3.5 or higher is required. This may not be installed by default.
      To install, go to Control Panel -> Programs and Features -> Turn Windows features on or off, and install .NET Framework 3.5.
    • 1.5GHz CPU or higher
    • 2GB RAM (4GB or higher recommended)

    The kit includes all necessary software and leads to connect to a Fiat or Alfa Romeo car fitted with a 16-pin diagnostic connector. 

    No need to modify interfaces or mess-about with break-out boxes, the included adaptor leads provide connections to the required pins to cover ABS, Airbag, Power Steering, Electric Hood etc.

    What about updates?

    The software licence entitles you to 12 months of free updates from the date of registration.

    Return of product

    In the unlikely event that you decide to return the product, we will of course provide a refund, but we regret that we cannot refund the software price if the MultiECUScan software has been registered. We recommend testing your vehicle with the free software version available from MultiECUScan.net and only once satisfied it works correctly, using the Promo code included in the package to register the full version.

    IMPORTANT NOTE: These adaptor cables are only intended for use with the MultiECUScan software, on supported Fiat group vehicles, as listed on the MultiECUScan.net Supported Vehicles List.
    Use on other vehicles or with other software is not supported and may cause damage to your vehicle or equipment.

    A Word About Us

    We have worked within the UK and European Car Diagnostics market since 2001 and have built up a wealth of experience and product knowledge. We sell mainly through our website, but have opened an ebay shop to help generate interest in this relatively new field and market our products to a wider audience.
    All information here is the result of our experience and not just copied from someone else's site.
    We are honest in our approach to stating what our tools can do and which cars they will work with. Please email if you have any queries.


    Shipping Information

    Products are shipped from the UK, so NO import duties or taxes will need to be paid when items are delivered to a UK address.
    We ship orders within one working day of receiving cleared payments.

    Payment Information

    We are a UK Limited Company and will provide a VAT receipt for the product.


    Returns

    If you have a problem with your item, please contact us... the products are rarely faulty and many issues can be resolved quickly and easily. If you wish to return an item, please contact us by email first.

    If we have stated that this tool will work with your car, either on the ebay auction page or via email contact, and we are proved to be wrong, then we will accept the item returned for a full refund within 30 days of receipt.

    Unwanted goods can be returned within 30 days of receipt provided that they are returned 'as new' (i.e. unopened and undamaged). The customer must pay for safe carriage of the item back to us.
    We cannot refund our postage and packaging costs on returned items, even on 'Free P&P' items.
    (i.e. the actual amount we are charged by the shipping companies to despatch your order to you).

    Any product returned to us must be returned with all associated items originally sent as part of the product and in the same packaging, unless otherwise agreed with Gendan Ltd.
    Any refund will not be issued until we have received the returned items.