INSTRUCTIONS:

REQUIRED MATERIALS:


1. Leather Luster Pre-cleaner or General Purpose Lacquer Thinner 
2. Cotton, Terry Cloth Rags 
3. Leather Luster Polish
4. Fine Steel Wool

PREPARATION:

1. THIS MUST BE DONE IN A WELL VENTILATED AREA. 

2. You must remove all waxes, oils, and dyes from the leather by scrubbing with the Pre-cleaner and rough terry cloth rags.   Note: This must be done until no more color appears on the Rags.  Because some leathers contain so many oils and dyes, some may require more than a single can of Pre-cleaner.

3. After step 1, allow to dry for 10 mins.  Note: For some of the more popular brands of boots, we have found great success with using a fine sandpaper, (180-220) to lightly buff the leather; it seems to help open the pores of the material, Wipe again with Pre-cleaner and set to dry.



APPLICATION:

 1. Apply a thin coat of Leather Luster.  Allow to dry 4-6 hours. The first coat of Leather Luster will not have a shine.  Note: If possible, place in direct Sunlight, this will aid in drying;                         
DO NOT BAKE THIS PRODUCT.
  

2
. Apply a Second coat of Leather Luster and set to dry.  Note: The First coat of leather Luster must be DRY, not tacky at all.

2a
If Leather Luster is not completely Dry: Not all oils and dyes have been removed; Use Pre-cleaner and terry cloth rags to re-scrub the tacky areas, dry leather luster will not be removed.

3
. Once you have 2 good coats, Use the fine steel wool to buff the leather to a smooth even surface.   Note: Some leathers may require 3 coats before buffing.

4
. Clean the material of all steel wool particles.   

5
. Apply a coat of leather Luster. If this is your final coat, take your time. Bubbles can be removed by lightly blowing on them.  Note: you can repeat steps 3-5 until the desired gloss is achieved.

TO REMOVE LEATHER LUSTER:

1.
 You will need Leather Luster Finish Remover (Item # M00000)

2.
 Apply Leather Luster Finish Remover liberally to a small section of the shoe. Let sit for 30-60 seconds. The old Leather Luster will coagulate and rise off of the leather.  

3. Wipe and/or scrape off old leather luster and repeat until all Leather Luster is removed.


IF YOUR FINISH GETS SCUFFED OR SCRATCHED:

1.
 Buff the area with the steel wool pad.

2. Apply a coat of Leather Luster and allow to dry.




FREQUENTLY ASKED QUESTIONS

Does Leather Luster work on all shoes?

Leather Luster was formulated for leather only. The product has been used on leather upper balance man-made materials, boots and shoes with success. However, you must follow the instructions completely. We have found that many boots and shoes today have water proofing and oil resisting agents on them; therefore, use only very thin coats when applying Leather Luster. You will get the same high gloss shine.


Does the thickness of the leather matter?

Leather Luster must be able to soak into the material. If the material is thin on the boot or shoe, then you should only apply 2-3 thin coats of Leather Luster. If product has too many coats, the product may start to peel on man-made material boots and shoes. Again we stress that the Leather Luster must be able to soak into the boot or shoe.



How long will Leather Luster last?
The Leather Luster shine will last six months to a year, if not longer. This varies due to usage.
What do you do if leather article scuffs or appears dull after a while?
    Buff leather article with steel wool and apply a coat of Leather Luster.
Leather Luster will not dry?
Proper cleaning is required when using Leather Luster, re-clean the leather article. Wet Leather Luster will come right off with Leather Luster Pre-cleaner.
Can you blow-dry or use the oven to dry leather article?
No. Leather Luster will not guarantee product not to crack or peel if natural drying process is not used.
Can I use alcohol to clean off waxes, oils and dyes?
No, No other product or cleaner can be used with the cleaning step. You must use Leather Luster Pre-cleaner or General purpose Lacquer thinner to do the proper cleaning.




Leather Luster Kit



The Leather Luster Kit contains a 4oz. can of Leather Luster with an applicator in the can; a 4oz. can of Leather Luster pre-cleaner (used to remove waxes, oils and dyes from the Leather); and a steel wool pad (to buff the finish between coats to achieve a smooth even surface for a high gloss shine). The kit contains all necessary items for several applications Net Wt. 12 oz.

Order Cancellations and Changes Policy:
CobblerSupplies works hard to ship orders as quickly as possible. As a result, once an order has been placed, 
it cannot be canceled or changed in any way. This includes changes to the payment method, shipping information or 
items in the order. In the unlikely event that CobblerSupplies is unable to fulfill your order, you will receive an email 
notice and your original form of payment will be refunded as soon as possible.

Returns Policy:
CobblerSupplies return policy allows for products purchased directly from CobblerSupplies
and shipped to locations in the United States to be returned by you after contacting   Customer Support via the eBay Message Center during the 30 day period following date of shipment by CobblerSupplies for a refund of purchase price actually paid. Shipping and handling charges are not refundable. If you have received damaged, defective or incorrectly shipped merchandise, please notify Customer Service within 30 days. The return instructions may be obtained by contacting CobblerSupplies Customer Support via the eBay Message Center (for eBay purchases). Products must be returned in the original packaging. You are responsible for and must prepay all shipping charges, and you shall assume all risk of loss or damage to Product while in transit to CobblerSupplies Damage and missing-part restocking fees may apply. If you return a Product to CobblerSupplies (i) without requesting a return instruction and approval from CobblerSupplies or (ii) beyond the 30 period, or (iii) without proper packaging, CobblerSupplies retains the right to either refuse delivery of such return or charge you a restocking fee. Please allow up to eight weeks for CobblerSupplies to credit your account.

Customer Support:
If you have any question, issue or concern please contact us via eBay Message Center ONLY! Please DO NOT contact us through any email you find. Please do not reply to any email you got from eBay about item purchased from us. It will not be answered. 


Attention INTERNATIONAL Buyers: For all international buyers, we're not responsible for any international customs fees or duties of the destination Country. Refuse of the package will lead to buyers $ 20% of the total price loss as shipping, insurance, and return delivery charges.

ATTENTION: ALL Buyers:
 Refuse of the package will lead to buyers $ 20% of the total price loss as shipping, insurance, and return delivery charges.