Tapes Master 1 Mil polyimide tape is alternative to 3M Kapton tape 5413. The tape is a HN general purpose amber color film with silicon adhesive and 3” polyethylene core. Rosh approved and Halogen Free
Polyimide tape not only flame retardant (at temperatures as low as -273°C (-459°F) and as high as 400°C (752°F)), but also chemical and radiation resistant which protects surfaces to help reduce replacement costs
Polyimide film does not soften at elevated temperatures, thus provides an excellent release surface at elevated temperatures. In addition, silicone adhesive's high temperature performance reduces adhesive transfer which helps to eliminate cleaning, enabling high productivity
Unlock limitless possibilities with Tapes Master 1 Mil Polyimide Tape. Whether you need to protect gold fingers during wave solder or solder dip processes, insulate electrical switches, motors, or lithium batteries under Grade H, our tape has got you covered. Embrace superior protection, insulation, and bonding capabilities for your diverse needs
Discover the ultimate surface solution for your 3D printing endeavors. Our Polyimide Tape offers exceptional adhesion between Kapton and ABS, making it the recommended bed surface for 3D printers
Our Tapes are manufactured in a facility certified to ISO 9001 (Quality Management System), ISO 14001 (Environmental Management System), and ISO 45001 (Occupational Health and Safety Management System) standards.
CATE NO: KPT201 | |
Model No: | KPT201-3145 |
Color | Amber |
Adhesion Type | Silicone |
Film Thickness | 1.2 Mil |
Adhesive Thickness | 1.5 Mil |
Total Thickness | 2.7 Mil |
Adhesion to Steel | 25 oz/inch |
Tensile Strength | 30 |
Elongation | 40% |
Dielectric Strength | 8,000 volts |
UL-94 Flammability Rating | V-0 |
Insulation Resistance | 1,000,000 mega ohms |
Electrolytic Corrosion Factor | 1 |
Insulation Class (°C) | 180°C |
Temperature Resistance | 260°C (500°F) |
Resistance to Acids/Solvents | Excellent |
Length | 36 yards |
Due to the variety of possible end-uses, the technical information, and data showed on this page should be considered representative or typical only and should not be used for specification purposes. It is the customer's responsibility to determine a product's suitability for a particular application.
On select items only. Offers are subject to change at anytime, while supplies last.
“This is the good stuff. I tried the blue tint and the clear it is not as tacky as this. Good heat resistance, glue sticks to the tape not to the other surface. Very little stretch, use a sharp edge to cut. Excellent product”
The United States
on on April 19, 2022
“I had a GPU that needed a reflow... sure you can oven bake it like a cave man, or use a heat gun like a pro, but you always want to keep things safe and neat and work where you want to work at. The tape came on and off with no issues and protected the rest of the GPU from an unwanted or un-needed heat from the heat gun. No residue was left after removal and I have to recommend this to anyone that is needing to either de-solder or apply heat to components of electrical basis/matter”
The United States
on on March 22, 2022
“I use this mainly for my electronics hobbies but the adhesive doesn't fail even under heat. So I've used it to tape up many things like my PAS sensor on my ebike. It's held for almost a year so far and is still hard to peel off even after being wet. It also doesn't leave any residue”
The United States
on
on November 11, 2022
Quality is the most important thing we ensure so that our products will
continue to effectively work for you. Making high quality products not
only saves you money but also protects our environment. We are grateful for your opinions and
feedback, which allow us to further improve the quality of our product. Therefore, if our products
couldn’t meet your standard, we want to take them back. No question asked.
Follow us to receive your special
discount