If your laptop model is not listed you can try this cable.
This converter is used to solve the problem of 15.6" CCFL screen shortage, but not solving the problem of adjusting lightness.
Before using our products,firstly,you need to remove the original screen and inverter(high-voltage bar) from your laptop.
Secondly,connect the 15.6" LED with our converter,in the meantime,the cable from laptop should be connected with our converter's connector
(each pin on this connector stays 1mm away from the next one).
Thirdly, connect the position where the inverter once connected with port on our converter's PCB board.
You can read compatible laptop models written on the board while you connect them.
Then, congratulations, you can use your laptop now. Fasten cables inside laptop avoiding short circuits.
Especially, there is 5-21V DC voltage on some pins of the PCB board when laptop works.
Yellow FPC cable can be folded as you require without harming its usage.
But folding the cable repeatedly back and forth is not recommended.
Compatible With...
Toshiba L505
HP 4520
Fujitsu A1120
Samsung R522/519
Samsung R516/517
Lenovo G555
Dell 1545/A860
Sony 7184 nw20ef
Toshiba A130 , A135, L455
Acer 5552, 5516, 5734z
HP 621
HP G60, DV6
ASUS K52C
HP CQ60
Acer 5735
+ Many others.