PID Pellet Grill Controller
Featuring PID Auto-tuning Algorithm Technology™ that maintains your set temperature within 5° by reading the temp every 4 sec and automatically adjusts the induction fan speed and auger speed to precisely hold the set temperature.
Take your barbequing experience to the next level with the Pellet Pro° PID Controller!!
FREE Lifetime firmware updates. Send PID Controller to us when there is an update to the firmware. We will update this version controller at no cost and send it back to you!
This unique controller has been in research and development for the past year and we are proud to offer it as an upgrade to retrofit most pellet grills on the market!
Designed for both Competition use and Home use!
Unlike most controllers that are used on other brands of hopper assemblies, our PID controller will auto tune to your particular application. No need to be concerned about changing outdoor weather conditions or factors such as the pellet BTUs. Gone are the frustrating drastic temperature swings and having to manually change your settings. Our controller maintains your temperature consistently for the entire duration of long and slow cook times. Also available is our own custom made wire harness. It enables you to operate two or even three hopper assemblies with one controller on larger applications.
Special Features:
- Auto-tuning Algorithm Technology™ holds set temp within 5°
- No need to reprogram for different applications
- Set temp in 5° Increments from 160°F-450°F
- Able to manually "Feed" pellets into burnpot during "standby"
- 15 minute shutdown cycle
- Meat Probe included that connects directly to controller to conveniently monitor temperature
- Improved heat distribution that eliminates hot spots
- Compact design, takes up very little space.
- "Mid" button: automatically sets temperature to 270°F
- "High" button: runs auger motor constantly in order to reach max temperature
- "Smoke" Setting: maintains a temp range of 170°F-210°F and will produce more smoke.
- switch between °F and °C
- FREE Lifetime firmware updates. Send PID Controller to us when there is an update to the firmware. We will update this version controller at no cost and send it back to you!
Order Includes:
- Pellet Pro® PID Controller©
- Custom Adapter Plate
- Meat Probe
- Ambient Temp Probe w/ Long Wire
- Operation Manual
The *New*
Upgraded Sportsman Algorithm
With our newly reengineered PID algorithm named the “Sportsman
Program,” you are now able to set the temperature as low as 100 degrees F for
smoking at lower temperatures with a pellet smoker. Perfect for smoking jerky, sausage, fish, or
anything else that doesn’t require high temperatures to smoke.
*PLEASE NOTE* Since the
hopper assembly needs to maintain a fire in the burnpot at all times, you may
need to increase the ventilation by cracking open the grill/smoker door. This will allow the heat to escape properly resulting
in lower temperatures.
Compatible with Traeger, Pit Boss, Camp Chef, ect...
*The mounting hole must be at least 2-5/8" wide on the hopper assembly for the PID Controller to be mounted*
The Pellet Pro® PID Controller is used by us as a retrofit for many different brands of pellet grills. Some brands may not be compatible with the PID Controller as it is designed to be used with a 2 rpm 0.4 amp auger motor and .48 amp fan motor. Smoke Daddy Inc. is not responsible for any misuse of the PID Controller that may cause damage to the customers’ grill or any other property. Smoke Daddy Inc. offers a 30-day money back guarantee where a full refund will be applied once product is received back in un-used condition. Therefore, this product is being sold subject to the following:
“This PID Controller is provided ‘as is’ and with the limited warranty as stated above. Smoke Daddy makes no guaranties or warranties of any kind, either expressed or implied, including but not limited to warranties for a particular purpose, warranty of merchantability or of non-infringement of any rights of third parties.”
and many other Grill Brands!!
*The PID Controller Operates where the fan motor and auger motor pulsate at different times. It will operate differently than other controller brands to maintain a stable temperature*
Disclaimer:
The Pellet Pro® PID Controller is used by us as a retrofit for many different brands of pellet grills. Some brands may not be compatible with the PID Controller as it is designed to be used with a 2 rpm 0.4 amp auger motor and .48 amp fan motor. Smoke Daddy Inc. is not responsible for any misuse of the PID Controller that may cause damage to the customers’ grill or any other property. Smoke Daddy Inc. offers a 30-day money back guarantee where a full refund will be applied once product is received back in un-used condition. Therefore, this product is being sold subject to the following:
“This PID Controller is provided ‘as is’ and with the limited warranty as stated above. Smoke Daddy makes no guaranties or warranties of any kind, either expressed or implied, including but not limited to warranties for a particular purpose, warranty of merchantability or of non-infringement of any rights of third parties.”
*For any international orders, there may be additional charges for duties and tax.*
PayPal is preferred payment method.
USPS will be used for single orders. For orders of 2 or more, UPS will be used.
For any returns, please contact us via eBay
For any Questions or Concerns, please contact us via eBay
Pellet Pro® PID Controller Instructions
Video will open in a new window