This device processes an input image to correct geometry errors. It accepts high resolution video in digital DVI format, automatically locking to the input video and processing it in real time. The operator can process the entire input image or select an input area of interest to be scaled and processed. It can also perform scan conversion in addition to specified re-mapping functions, with output format-selectable to match the output device's native resolution, ensuring optimal image fidelity.
In warp mode, Screen Shaper can be used to correct geometry errors introduced by an optical system. Typical applications include correction for distortion when an image is projected off-axis or onto surfaces that are not flat. Warp mode can also be used for non-curved applications to adjust overlap region aberrations caused by lens distortion or imperfect projector placement.
In rotation mode, it can rotate or flip a high-resolution image. Typical applications include conversion of vertically-scanned images to standard raster format, rotation to support displays in portrait mode (rather than in the typical landscape mode) and mirroring to correct for image flips introduced by optical systems.
Video Input | Number: 1 Video Signal Format: Accepts digital (DVI)video Resolution: Supports resolutions up to 1280x1024,60 Hz, non-interlaced Input Sync Format: Separate H &V Sync,C sync or Sync on Green Connector: DVI-I connector supports both digital and analog input;HD-15 adapters are available. Termination: 75 ohms for analog video |
---|---|
Video Output | Number: 1 Video Signal Format: Outputs digital (DVI)video Resolution: Supports resolutions up to 1280x1024,60 Hz, non-interlaced Output Sync Format: Separate H &V Sync,C sync or Sync on Green. Connector: DVI-I connector supplies digital and analog output;HD-15 adapters are available. Output Impedance: 75 ohm for analog video |
Video Processing | Processes the entire input image or a user-defined "area of interest" in real time |
User Controls | Front Panel Controls: Electro-luminescent display,control knob and six keys provide a menu-based front panel interface to simplify set-up and adjustments. Remote Control: RS-232/RS-485 serial interface provides remote control of all functions. |
Physical | Width: 17"(432mm)or 19"(483 mm)with rack mount option Height: 1.75"(44.5mm)one Rack Unit Depth: 16"(454.5mm)all input/output connectors are mounted on the rear of the unit Weight: 9 lbs (4.1 kg);Shipping Weight:13 lbs (5.91 kg) |
Input power | 98-264 VAC,47-63 Hz,auto-ranging, 45 watts maximum |
Environmental | Operating temperature: 0-40 degrees C |