This is a mid size Slayer Exciter Tesla Coil.
See my other listings for larger coils.
This Slayer Exciter Tesla Coil comes as pictured above with the coils wound and the circuit pre made on the breadboard. The circuit used can run from 1.5 volt to 20 volts, pictures shown running at 1.5 to 18 volts.
All that is needed is put the L1 pancake coil around the L2 coil and connect it to the breadboard( L2 connects to the red wire on the breadboard row 29 J,H, or G ) and connect the battery.
This also comes with three circuit diagrams a parts list and a certificate of authenticity signed and dated by the inventor of the Slayer Exciter circuit.
The L1 coil is a 5 turn pancake coil.
The L2 coil is 1 1/2 by 7 1/2 inches tall with 5 3/4 inches of 34 gauge magnet wire.
The Extra components are.
1=High Quality Breadboard with one of the circuits assembled in it
1=100k resistor
1=1M resistor
1=veritable resistor
1=500 pf capacitor
8=assorted test jumpers
3=2N2222 transistors
1=TIP 41c transistor
1=TIP 42c transistor
2=UF4007 diodes
4=1N4148 diodes
1=Heatsink
1=AA battery holder
1=9v battery holder
2=clip leads
2=LED's
3=circuit diagrams
1=LED connected to an AV plug for testing