This motorcycle alarm universal fit 12V Motorcycles
Remote Controller Distance: 50-100 Meters
Included: 1 x Alarm Host
2 x Remote Controllers
1 x Connection line
1 x Loudspeaker
1 x User Manual
FEATURES
1.Special design for motorcycle. Remote controller operation.
2.Locks your motorcycle in case of steering lock damage, attempted wire connection, or short circuit.
3.No stealing while parking and no robbering while driving
- Recognize the owner of the vehicle and protect from instruction by not allowing the engine to be turned on
5.Control the circuit of the vehicle and make sure your vehicle can not be started with a simple wire bridge.
INSTRUCTION:
①Anti-theft alarm: In the normal state , single click set button
- Pre-alarming: after 3 seconds of a horn sound, the system automatically get into the security states.
- Emergency alarming: In a state of alert, the engine is locked and unable to start with loud horn blaring if a key is forced to open the locomotive at the same time.
②Anti-robby: In the driving state, single click set button
With loud horn blaring, steering wheel quick flashing and the engine is flameout.
③Disarming: In the alert state, single click remove button
Steering wheel flashes twice, the horn rings twice.
④Remote flameout: In the remote start driving state, single click remove button
Immediately pow-off, parking stall.
⑤Remote Start: In the normal or alert state, double click start button
The Locomotive starts immediately, it can be repeated the above operation if the cold start is not successful. (Note: The Switch button has no effect under the open state)
⑥Overtaking: In the driving state, single click car finder button
The horn sounds for 10 seconds and the turn signal synchronous flash, in order to show the overtaking.
⑦Finding car: In the normal or alert state, single click car finder button
Telling the owner position after the horn sound for 10 seconds. Press any key to stop.
⑧Remove state or anti-theft state: In the remove state or anti-theft state, long press car finder button 2.5 seconds
Consecutively click this button for 2 seconds and then a prompting sound: entering the five-stage vibration sensitive cycle adjustment. The default sensitivity is the fourth level. (The first level is slow, prompting sound is a sound. The fifth stage is the most sensitive, prompting sound five sounds. Pressing this button to confirm the selected level in prompting sound)
⑨Mute function
- long press the lock key enters the mute state.
- Open voice, gently press the lock key open voice.