Quantity |
4Pcs 5mm(Without Lug Studs) |
Torque Specs |
113NM |
Vehicle Bolt Pattern |
5x114.3 MM / 5x4.5" |
Hub Centric Height |
Yes, 10MM |
Wheel Bolt Pattern |
5x114.3 MM / 5x4.5" |
Material |
Forged 6061-T6 Aluminum Alloy |
Thickness |
5MM |
Minimum Number of turns for Bolts/Nuts |
6.5 Turns |
Vehicle Hub Bore |
60.1 MM |
Fit Models |
Lexus/Toyota |
Wheel Center Bore |
73.1 MM |
Color Choice |
Black Anodized |
Stud |
Needless Lug Nuts/Studs |
Brand |
BLOXSPORT |
This item fit converting new wheels on vehicle:
Vehicle bolt pattern 5x114.3, vehicle hub bore 60.1mm change into Wheel bolt patten 5x114.3, wheel center bore 73.1mm.
- High-Strength Aircraft Aluminum Alloy 6061-T6,Forged Material.
- Brand Wheel Spacers, Real Material, Laser Material Number and Logo on Spacers/Adapters.
- Hard Anodized for durability and corrosion protection.
- Precision Engineered Hub-Centric and Model Specific for Perfect Fit and Wheel Balance.
- Limited Life Range Tested for Wheel Bolts/Stud (1 Million Times) in accordance to ISO3800.
- Strength-Tested for Applications (Bolt/Stud/Nut) in accordance to ISO898-1,ISO898-6,SAE J429,SAE J995.
- Anti-Rust Tested (NSS 72 Hours) for Applications (Bolt/Stud/Nut) in accordance to ISO9227.
Please check the following compatible models for this item:
1996-2016 - Toyota - RAV4
2001-2016 - Toyota - Highlander
1999-2010 - Toyota - Solara
1986-1998 - Toyota - Supra
1997-2004 - Toyota - Tacoma (2WD ONLY. Excludes Pre Runner)
2005-2008 - Toyota - Tacoma (only 5-lug vehicles)
2006-2008 - Toyota - Highlander Hybrid
1998-2016 - Lexus - RX300
2003-2009 - Lexus - RX330
2006-2011 - Lexus - RX400h
1998-2016 - Lexus - GS300
2005-2016 - Lexus - GS350
1998-2016 - Lexus - GS400
2005-2016 - Lexus - GS450
1992-2003 - Lexus - ES300
2004-2006 - Lexus - ES330
2007-2011 - Lexus - ES350
2006-2013 - Lexus - IS250
2001-2006 - Lexus - IS300
2006-2016 - Lexus - IS350
1989-2000 - Lexus - LS400
1991-2000 - Lexus - SC300
1991-2000 - Lexus - SC400
2001-2006 - Lexus - SC430
>> Hub Centric Design--NO VIBRATION
As you can see in the cross-section diagram of a hubcentric wheel spacer above, the locating ring fits into the space on the wheel exactly as the hub's locating ring would.This means that the weight of the car is still resting on the hub rather than the wheel studs, meaning the vehicle is set up just like it came from the factory, meaning no vibrations from the wheels, and also protect the studs.
However, with a non-hubcentric wheel spacer, the weight of the car is no longer on the locating ring and is now on the studs, it more easily cause vibrations from the wheels, and studs bear all weight of the car. That doesn't mean you can't choose non-hubcentric wheel spacer, but just confirm the studs are in good quality.
BLOXSPORT team design different hub centric(Wheel-centric lip) for different car models. Making the car at high speed, speed cross-country more secure and stable. To ensure car no vibration or shaking.
>> SAFETY--Forged Aluminum Alloy Material
5 years warranty -- Forged Aluminum 6061-T6
Forged material possesses a better performance, they can meet the demand in different kinds of the extreme environments (rally, cross-country, etc.) more than 5 years warranty. It is not an ordinary aluminum(casting material), it is even an aluminum alloy for aircraft manufacturing, so you can rest assured to use.
BLOXSPORT used Real FORGED material, have been made laser material number(Forged Aluminum Alloy 6061-T6 or 7075-T6) and brand logo on spacers. Refuse "Three-None".
As the picture show you, The casting material made wheel spacers performance is too bad, easily being snapped off and pose a very serious threat to the driving safety. BLOXSPORT insist on using the forged material, insist on the conception of putting safety in the first place and reject to use the casting material.
Sample of wheel studs 12.9 grade has been tested by according to Test method: ISO898-1:2013, Cor.1:2013, on 08 December 2015, report No. GZIN1512051950ML. Report is available on request and can be validated by . .
(Quality and Safety, Above all.)
>> Modern CNC Machined + Hard Anodized Surface
The
wheel spacers were modern CNC machined, the surface was more
smooth, increasing car driving more stable and more secure and no
vibration. 0.02mm Machining precision, the consummate data comes
from constant practice, BLOXSPORT always make perfection more
perfect.
Black color hard anodized is more beautiful and luxuious, anti-rust.
How Thick Should your car fit?
Before you buy, please confirm that this is the thickness you
need. If you not sure which thickness you can install for your car,
please use the measuring device to measure from the inside of the
straight edge to the inner fender lip as below showing.
Item Benefits:
- Remove gad by spacing wheel and tire out to fit with fender after handing
- Increased performance in wheel drive conditions, improved appearance.
- Improve brake caliper clearance, BLOXSPORT spacer adds more clearan between brake caliper and wheel.
- Add inner fender clearance, add clearance between tire/wheel and inner fender.
- Add clearance between suspension and tire/wheel.
Product effect:
- Increase the car wheel track, reduce the body center of gravity, reducing the body deformation.
- To improve vehicle stability and improve handing and other functions.
- To ensure that the car is more flexible, smooth and safe.
- To be able to make the sability of the vehicle greatly ascend.
Packing with hard boxes and froth bag, all-round protection for products, you will get a better experience.
- Installation should only be performed by a trained professional.
- Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle.
- Please take the necessary measurements to ensure proper fitment. we only guarentee that you will receive the spacers that is described, we do not guarentee any fitment onto any vehicle.
- Please insure that the bolt patterns and thread patterns of your vehicle match the specifications above. That will insure a smooth installation.
- If the studs are longer than the Adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your exsisting lugs if you choose not to purchase shorter studs.
- If you have any questions reguarding how to properly measure your bolt pattern, please contact us via ebay, and we can give you detailed instructions.
>> Factory Shows
M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length
M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length
M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length
>> How much standard torque force of different lug bolts or nuts is?
M12: 113NM(83.3Ft-tb); M14: 140NM(103.5Ft-tb); 1/2-20: 130NM(95.8Ft-tb)
--All Orders that Payment is received before 5pm Beijing Time M-F will be shipped the same day, if received after that time, they will be shipped the next business day, Saturday and Sunday orders will be processed and Shipped on Monday.
--All orders are shipped by DHL/FedEx/UPS within the continental United States. Other international Shipping is available. You need to contact us confirming express method and accounting shipping costs.
--Your purchase will be shipped via standard airmail, which normally takes 3-10 working days to arrive.
--We will provide you with tracking numbers when the item is shipped out.
BLOXSPORT have been specializing in manufacturing the wheel parts for 8 years. We supply wheel nuts/bolts(Locking/Classic...), wheel spacers(3mm-120mm, 1" inch etc.), custom wheel adapters 5 lug to 5 lug; 4 lug to 4 lug; 5 lug to 6 lug;6 lug to 8 lug... We refuse to use the wheel spacer made of casting aluminum and the bad quality bolt/stud, lug nut. We insist in using the forged aluminum alloy and high quality bolt/stud,lug nut(passed the 1 Million times Fatigue Test,etc.).
We always insist on four concept respectively:
1.insistence on the service philosophy that safty is No.1 and creating the value for our customers.
2. insistence on designing and producing by ourselves in order to make sure the our product's stability of the quality and reliability.
3. insistence on the test from the third party.
4. insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer's hand (not only the best quality but also there's no scratch on our products which has been sent to our customers).
