• 2-Channel Multi Function Wireless Control Relay
• 2-Channel Output wireless controller
• High Power 400W Max - 12V DC 16 Amps/Channel or 32 Amps total
• Low Weight 6.5 oz 
• Wirelessly control 12V electronics including lights, LEDs, Relays and other low current devices.
• 4 Functions total (3 patterns with 3 speeds each)
• Up to 100 Feet Usable Range - *Results can vary depending on location you install, away from metal
• 4 Button Remote Control with sliding cover

The GENSSI RM08 comes equipped with many features. The 2 outputs allow you to connect two separate groups of lights. Each box includes 1 remote controls and 1 receiver box. Wiring is required.

16 Amps at 12V DC max per channel. Please do not connect anything higher than 200W rated per channel. This product is not designed to control high spike driven electronics such as heavy duty motors. Best for lighting only.

Assuming you have two sets of lights A and B and various flash modes:

- Press Button: A (On or Off)

- Press Button: B (Zig-Zag Flash Pattern with 3 speeds)

- Press Button: C (Strobe Flash Pattern with 3 speeds)

- Press Button D: (Pulsing On/Off Fade Patter with 3 speeds)

Tip: If you buy more than one RM08, you can control multiple receivers with 1 remote controller. (with programming, opening of the receiver required! Must press a button inside and press a button on the remote)

Tip: Do not mount the receiver on hot surface or near extreme hot areas. It should be installed in a location that is also dry.

• Auto, Marine, Custom, 12V
• Control LED Light Bars: Example:
• 120W + 120W Light bar mounted on your vehicle can now be controlled wirelessly.
• Please use 16 gauge minimum thickness wire or more to ensure power good power delivery.